Instruction/ maintenance manual of the product HFB6 Hobart
Go to page of 16
701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.hobartcorp.com FORM 34485 (May 2000) MODEL HFB6 ELECTRIC OVEN MODEL HFB6 ML-126878 ML-126880 N S T R U C T I O N S I.
– 2 – T ABLE OF CONTENTS GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Unpacking .
– 3 – Installation, Operation, and Care of MODEL HFB6 ELECTRIC OVEN SAVE THESE INSTRUCTIONS GENERAL Your Hobart Flash Bake oven is a versatile oven that employs a revolutionary high quality, high-speed cooking technology. The baking process is so fast that food retains its natural juices.
– 4 – Fa n Flexib le Duct (By Others) O VEN REAR P ower Cord Duct Clamp (By Others) Blower PL-53483 INSTALLATION CODES AND STANDARDS The HFB6 Flash Bake oven must be installed in accordance with: In the United States of America: 1. State and local codes.
– 5 – ELECTRICAL CONNECTION — (Hard Wired Ovens) WARNING : ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES. WARNING : DISCONNECT THE ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH TO INDICATE YOU ARE WORKING ON THE CIRCUIT.
– 6 – START-UP TESTING After the oven is connected to the supply circuit, perform the following tests to ensure that the oven is operating properly. Lamp Test Turn the oven on by pressing the ON/OFF button. After a few seconds, the display will settle on Recipe 1.
– 7 – OPERA TION WARNING: THE OVEN AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING, OR SERVICING THE OVEN. PRECAUTIONS • Never attempt to open the oven door while a cook cycle is in progress. Never attempt to operate the oven with the door open.
– 8 – CONTROLS — Model HFB6 DISPLAY The display screen, located at the top of the control panel provides a constant indication of the oven status. It is also used for programming the oven and for the display of information and diagnostic messages.
– 9 – TO START COOKING You can start cooking immediately by choosing a cook mode, a length of time and pressing the START button. Press one of the four cook mode buttons (HI, MED, LO, or BROWN). Then enter the desired cook time in minutes and seconds( up to 99:99 max.
– 10 – PASSWORD PROTECTION FOR PRESETS This oven comes with an optional password protection to prevent accidental changes to the settings stored in the nine preset locations. To Enter a Password 1. Press and hold down the “1” button and press the “6” button simultaneously.
– 11 – CLEANING WARNING: DISCONNECT ELECTRICAL SUPPLY BEFORE CLEANING THE OVEN. WARNING: THE OVEN AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING, OR SERVICING THE OVEN. The interior cleanliness of the Flash Bake oven is essential to ensure maximum efficiency of your oven.
– 12 – 4. To start the interior cleaning, use a cloth dampened with one of the recommended cleaners. Be sure that the soap is non-caustic. Wipe the food debris out of the oven, working from the back forward. Do not pour cleaning liquids into the oven.
– 13 – OVEN DOOR LAMP SHIELD RAIL UPPER LAMP SHIELD LIFT LAMP SHIELD OVER RET AINING FEA TURE PULL LAMP SHIELD T OWARD YOU LOWER LAMP SHIELD (NON REMOV ABLE) PL-52646 REMOVING AND INSTALLING THE TOP LAMP SHIELD Turn the oven off before removing the lamp shield.
– 14 – MAINTENANCE WARNING: THE OVEN AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE OVEN. WARNING: DISCONNECT THE ELECTRICAL SUPPLY BEFORE PERFORMING ANY MAINTENANCE ON THE OVEN. Do not remove the oven covers or attempt to open the control cabinet.
– 15 – PROBLEM No power to the oven. No power to the oven controls or display. Blower not operating. Oven not cooking. Display screen does not light up. Grill does not rotate. Door does not lock. No "High Power". TROUBLESHOOTING POSSIBLE CAUSES 1.
– 16 – FORM 34485 (May 2000) PRINTED IN U.S.A. ERROR MESSAGES Under certain conditions, the oven will emit a short trill tone alarm when the operator presses a button.
An important point after buying a device Hobart HFB6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart HFB6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart HFB6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart HFB6 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart HFB6 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart HFB6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart HFB6.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart HFB6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart HFB6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
