Instruction/ maintenance manual of the product HEC20 ML-114574 Hobart
Go to page of 20
N S T R U C T I O N S I HEC20 & HEC20D ELECTRIC CONVECTION OVENS MODELS HEC20 ML-114574 HEC20D ML-114576 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 937 332-3000 www.
– 2 – T ABLE OF CONTENT GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
– 3 – Installation, Operation, and Care of HEC20 & HEC20D ELECTRIC CONVECTION OVENS SA VE THESE INSTRUCTIONS GENERAL The model HEC20 Electric Convection Oven features a solid state thermostat,1-hour dial timer, two- speed 1 ⁄ 2 HP ( .037 kw ) electric motor, and five racks as standard equipment.
– 4 – CHIMNEY PL-52240 Fig. 1 INSTALLING BASIC OVEN (HEC20 and HEC20D) The basic oven must be installed on legs or be mounted on a modular stand. Installations on concrete bases or other supports restricting air circulation underneath the oven are not advisable and may void the warranty.
– 5 – ASSEMBLING THE OVEN TO THE STAND Unpack the oven and stand. Position oven on its back, taking care not to scratch or damage it. Install the two locating studs (included in the stand carton) into the screw plates on the underside of the oven ( Fig.
– 6 – OPERA TION WARNING : THE OVEN AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING, OR PERFORMING ANY MAINTENANCE ON THE OVEN. CONTROLS — MODEL HEC20 (Fig. 3) Fig. 3 ON / OFF / COOL DOWN Switch — Turns oven control circuits ON or OFF; or COOL DOWN allows the fan motor to run with the doors ajar to speed oven cooling.
– 7 – BEFORE FIRST USE Before using the oven for the first time, it must be "burned in" to release any odors that might result from heating the new surfaces in the chamber. 1. Using a clean damp cloth, wipe the inside of the oven, including the racks.
– 8 – CONTROLS — MODEL HEC20D (Built before October, 1999, Fig. 4) PL-52231 T U R N G AS VA LVE "O N" P US H M AS TE R S W ITC H T O "O N " P O ST IO N .
– 9 – Cook Button Light (If On) - (While Not Timing Product) Indicates the cook mode is selected. This means: 1. The displayed temperature settings will be for the cook temperature except for the time that the light in the Thermometer Button is lit.
– 10 – Pulse Button Selects the pulse time setting. A cook time must be set first. The pulse time can then be set equal to or less than the cook time. The pulse time will be the portion of cook time to operate in the pulse mode. Pulse mode will start first.
– 11 – BEFORE FIRST USE Before using the oven for the first time, it must be "burned in" to release any odors that might result from heating the new surfaces in the chamber. 1. Using a clean damp cloth, wipe the inside of the oven, including the racks.
– 12 – 1 2 SET PRIMAR Y SECONDAR Y MENU SELECT 1/2 3/4 5/6 POWER ST ART COOK & HOLD STOP ON OFF DOWN COOL MENU RACK 3 4 5 PL-53569 MODE C & H READY OVEN HEA TING OVEN CONTROLS — MODEL HEC20D (Built after October, 1999) Always displays [HR:Min] when setting the Time.
– 13 – MANUALLY SETTING THE TEMPERATURE AND COOK TIME To Set the Temperature • Press the SET button. Press the TEMPERATURE button; StPt displays to indicate Setpoint. • Use the Up and Down Arrow keys to increase or decrease the displayed Temperature value.
– 14 – Always Set the Temperature Before Setting the Time • Press the SET button. Press the TEMPERATURE button; StPt displays. Use the Up and Down Arrow keys to increase or decrease the Temperature. To save, press the SET button again. At startup, the display will initially show a GROWING BAR .
– 15 – 400 º F 300 º F 200 º F 100 º F ROAST AND HOLD DIAGRAM - Time vs. Temperature SHORT BEEP. TIMER DISPLAYS "HOLD." ROAST THERMOSTAT OFF. HEATERS OFF UNTIL HOLD TEMPERATURE IS REACHED. HEATERS MAINTAIN HOLD TEMPERATURE. TIMER DISPLAY FLASHES "HOLD.
– 16 – PROPER UTENSILS The use of proper utensils can enhance oven operation. Medium- and lightweight pans are recommended since it is more economical to bake with lighter pans. Meats should be roasted in shallow pans deep enough to hold all juices and allow free air circulation.
– 17 – SUGGESTED COOKING GUIDELINES The following cooking time and temperature guidelines will vary depending on product temperature, size, shape, etc.
– 18 – ROLLED BEEF ROASTS — MODEL HEC20D COOK TEMPERATURE 200 ° F (93 ° C) 250 ° F (121 ° C) 300 ° F (149 ° C) HOLD TEMPERATURE 150 ° F (65.
– 19 – MAINTENANCE WARNING : THE OVEN AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING, OR PERFORMING ANY MAINTENANCE ON THE OVEN. WARNING : DISCONNECT THE ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH INDICATING THAT YOU ARE WORKING ON THE OVEN BEFORE PERFORMING ANY MAINTENANCE.
– 20 – FORM 33579 Rev.D (Mar. 2001) PRINTED IN U.S.A. SERVICE Contact your local Hobart-authorized service office for any repairs or adjustments needed on this equipment. Long-term service contracts are available on this and other Hobart products.
An important point after buying a device Hobart HEC20 ML-114574 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart HEC20 ML-114574 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart HEC20 ML-114574 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart HEC20 ML-114574 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart HEC20 ML-114574 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart HEC20 ML-114574, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart HEC20 ML-114574.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart HEC20 ML-114574. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart HEC20 ML-114574 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
