Instruction/ maintenance manual of the product FP41 Hobart
Go to page of 8
N S T R U C T I O N S I EXECUTIVE OFFICES 701 RIDGE AVENUE TROY, OHIO 45374-0001 FORM 18655 (8-93) MODEL FP41, FP61, & FP62 FOOD PROCESSORS MODELS FP41 ML-104345 FP61 ML-104346 FP62 ML-104347 FOOD.
– 2 – © HOBART CORPORATION, 1993 Feed Tube Handle Splash Guard Bowl Cover Scraper Scraper Blades Whip Knife Locating Pin Locating Pin Bowl Arm Groove for Locating Pin of the Bowl Indicator Knob D.
– 3 – Installation, Operation and Care of MODELS FP41, FP61 & FP62 FOOD PROCESSORS SA VE THESE INSTRUCTIONS GENERAL The Model FP41, FP61 and FP62 Food Processors may be used for: • Chopping .
– 4 – SETTING UP 1. Lift the arm up and then rotate it as far back as it will go. 2. Place the bowl on the machine so that the locating pins of the bowl are inserted into the grooves in the bowl recess on top of the machine, push bowl all the way down to the base and rotate counterclockwise slightly to lock in position.
– 5 – OPERA TION WARNING: ROTATING KNIVES INSIDE MACHINE. KEEP HANDS OUT. BEFORE FIRST USE Before using for the first time, wash all removable parts of the food processor in warm soapy water. The cutting blade is very sharp; be very careful when cleaning the cutting blade.
– 6 – USE OF CUT OR WHIP KNIFE The cut knife and whip knife are manufactured using high quality knife steel to give a keen cutting edge and effective cutting action. Never leave this type of knife in a wet condition when not in use and never place it on a stainless steel worktop.
– 7 – CAPACITY CHART The maximum quantity that can be processed at one time and the length of time required for the processing are dependent on the consistency of the product and the kind of result desired. Shorter processing times give a coarser end result, and longer processing times a finer one.
– 8 – MAINTENANCE WARNING: TURN MACHINE OFF AND UNPLUG THE POWER SUPPLY CORD BEFORE DOING ANY MAINTENANCE. Inspect the machine weekly to ensure that it is in proper working order.
An important point after buying a device Hobart FP41 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hobart FP41 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hobart FP41 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hobart FP41 you will learn all the available features of the product, as well as information on its operation. The information that you get Hobart FP41 will certainly help you make a decision on the purchase.
If you already are a holder of Hobart FP41, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hobart FP41.
However, one of the most important roles played by the user manual is to help in solving problems with Hobart FP41. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hobart FP41 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
