Instruction/ maintenance manual of the product rm-ltx7000 Hitachi
Go to page of 29
RM-L TX7000D Y RM-L TX7000 交流/充電式兩用 A C/RECHARGEABLE ֵ⭞䃠᱄ᴮ INSTRUCTIONS ਠ֒ᇬቻ⭞䙊 For household use only Made in Japan 日本製造 㒣䦉*6:25' ȝ方.
.
1 4 3 2.
8 13 14 15 16 17 18 19 20 21 22 5 9 6 10 1 1 12 7 （ ） 〔 〕 90° (1) (2).
23 24 25 26 27 28 29 30 31 32 33 34 (1) (1) (2) (1) (2).
English -1- Safety precautions Items described here are for using the product safely and properly , and to prevent hazards and injury to the user and other persons before they occur . Items are classified as follows. All items are important descriptions related to safety , therefore make sure to observe them.
-2- Do not use the power adaptor and LED light dryer in a place where water is splashed, such as a bathroom, or in a place with high humidity . (Cause of electric shocks and short circuits) Detach the hand-held part from the supply cord before cleaning it in water .
-3- Safety precautions 1. Never use cream or gel shaving agents. Cause of clogging and damage to the blade. 2. Never soak the blade in water . Cause of damage to the shaver . 3. Never dry it using a dryer or a fan heater , etc. Cause of deformation or damage to the shaver .
-4- Catch Attachment/detachment button Fan (Built-in) Charger socket Insert the plug for equipment of the power adaptor . Power adaptor : KH-187B Power plug Insert this into the outlet to its base. Plug for equipment Cord Cleaning brush Shaver oil Pouch Charging completion lamp During charge: The lamp turns on.
Caution When the switch is turned "ON," this cannot be charged. When the capacity of the battery is sufficient, the charging completion lamp may be turned off early .
-6- How to use It is recommended to use the shaver at an ambient temperature of 5°C to 35°C. Use or storage at a temperature below the recommended temperature may disable the shaver or cause a reduced number of operating times. For initial use, trim while lightly applying the shaver to skin.
-7- Power mode Beard can be shaved strongly and quickly at the time of start or in response to a thick beard. (Fig.1 1) The auto lamp is "turned off." The mode indicator "lights (blue)." Normal Mode Beard can be shaved comfortably and softly in response to normal beard and finishing.
-8- How to keep a comfortable sharpness After use (especially shaving with soap), make sure to perform maintenance. Make sure to wash the foil-cutter assembly with water . Accumulation of beard clippings will cause deterioration in sharpness or scattering of beard clippings.
-9- 4. Press the lower part of the head holder removal button to attach the head holder . (Fig.21) Make the front face of the head holder face the switch side for attachment. Caution The head holder cannot be connected in a state where it is facing back to front.
-10- 6. After drying, apply the shaver oil, and keep it in a place free from moisture. 5. After completion, take out the main body , and disconnect the power adaptor from the outlet. Caution : Never wash the LED light dryer with water . (Cause of failures) Brush cleaning Never clean the foil-cutter assembly with a brush.
-11- 1. T urn "OFF" the switch to remove the cap and head holder. (Fig.17) Press the head holder removal button (1) to remove the head holder in the arrow (2) direction.
-12- - Failure of drying with the LED light dryer Check for accumulation of dust, etc., inside the LED light dryer . Periodically perform maintenance. Check to see if water drops on the main body and blade surface have been wiped off after washing with water .
-13-.
-14-.
-15-.
-16-.
-17-.
-18-.
-19-.
-20-.
-21-.
-22-.
-23-.
-24-.
An important point after buying a device Hitachi rm-ltx7000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hitachi rm-ltx7000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hitachi rm-ltx7000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hitachi rm-ltx7000 you will learn all the available features of the product, as well as information on its operation. The information that you get Hitachi rm-ltx7000 will certainly help you make a decision on the purchase.
If you already are a holder of Hitachi rm-ltx7000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hitachi rm-ltx7000.
However, one of the most important roles played by the user manual is to help in solving problems with Hitachi rm-ltx7000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hitachi rm-ltx7000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
