Instruction/ maintenance manual of the product C6DD Hitachi
Go to page of 22
.
0 D G 3 4 12 56 78 9 10 11 12 D C F E 8 9 A 5 6 0 1 12 4 5 7 6 3 5 B.
.
3 23 24 21 22 27 28 25 26 29 30 T Y F [ Z ] a ` c ` ` d e i j D k l g h f 11.5 mm 3 mm.
.
.
.
.
.
.
.
.
12 GENERAL OPERATIONAL PRECAUTIONS 1. Keep work area clean. Cluttered areas and benches invite accidents. 2. Avoid dangerous environment. Don’t expose power tools and charger to rain. Don’t use power tools and charger in damp or wet locations. And keep work area well lit.
13 21. The saw blades body must be thinner than the riving knife and the width of cut, or kerf (with teeth set) must be greater than the thickness of the riving knife. 22. Never operate the circular saw with the saw blade turned upward or the side. 23.
14 STANDARD ACCESSORIES Standard accessories are subject to change without notice. C6DD 1 Saw Blade (mounted on tool) ................................................................................ 1 2 Box Wrench .....................................
15 Lights for 0.5 seconds. Does not light for 0.5 seconds. (off for 0.5 seconds) Lights continuously Lights for 0.5 seconds. Does not light for 0.5 seconds.
16 5. Regulating the guide (Fig. 16) The cutting position can be regulated by moving the guide to the left or right after loosening its wingbolt. The guide may be mounted on either the right or left side of the tool. HOW TO USE 1. Operation of switch (Fig.
17 CAUTIONS 䡬 Before starting to saw, ensure that the saw blade has reached full speed revolution. 䡬 Should the saw blade be stopped or made an abnormal noise during operation, turn off the switch immediately. 䡬 When finished with a job, pull out the battery from the main body.
18 NOTE: When replacing the carbon brush with a new one, be sure to use the Hitachi Carbon Brush Code No. 999058. 5. Replacing carbon brushes Take out the carbon brush by first removing the brush cap and then hooking the protrusion of the carbon brush with a flat head screw driver, etc.
19.
20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 29 19 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 501 502 503 504 47 48 49 50 51 52 53 54 55 56 57 58 21 59 60 6.
203 Code No. C99104221 Printed in China.
An important point after buying a device Hitachi C6DD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hitachi C6DD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hitachi C6DD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hitachi C6DD you will learn all the available features of the product, as well as information on its operation. The information that you get Hitachi C6DD will certainly help you make a decision on the purchase.
If you already are a holder of Hitachi C6DD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hitachi C6DD.
However, one of the most important roles played by the user manual is to help in solving problems with Hitachi C6DD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hitachi C6DD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
