Instruction/ maintenance manual of the product 8916 Hitachi
Go to page of 16
1 ENGLISH Projector 8755H / 8916 User's Manual (concise) Thank you for purchasing this projector . WARNING ►Before using this product, be sure to read all manuals for this product. See “Using the CD manual” ( 15 ) to read the manuals in the CD.
2 Fastening the lens cover T o avoid losin g the lens c over , please fasten the le ns cover to the projector using the enclosed strap. 1. Fix the strap to the strap hole of the lens cover . Thread one end of the strap through the strap hole of the lens cover and make the loop at the end, and let the other end of the strap through the loop.
3 ENGLISH On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the sides of the projector and other objects such as walls. • Consult with your dealer before a special installatio n such as suspending from a ce iling.
4 Connecting your de vices Be sure to read the manuals for devices before connecting them to the projector . Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them.
5 ENGLISH Connecting pow er suppl y 1. Put the connector of the power cord into the AC inlet of the projector . 2. Firmly plug the power cord’s plug into the outlet. WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in re and/or electrical shock.
6 Adjusting the projector's eleva tor When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally . Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 10 degrees.
7 ENGLISH Displaying the picture 1. Activate your signal source. T urn the signal source on, and make it send the signal to the projector . 2. Use the VOLUME +/VOLUME - buttons to adjust the volume. T o have the projector silent, press the MUTE button on the remote control.
8 VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON POSITION 1 2 ESC ENTER MENU RESET COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE UP VOLUME DOWN ON OFF 㧗 FREEZE T ur ning of f the power 1. Press the ST ANDBY/ON button on the projector or the remote control.
9 ENGLISH R eplacing the lamp A lamp has nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor . Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
10 HIGH VOL T AGE HIG H TEMPE RA TURE HIGH PRESSU RE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
1 1 ENGLISH Please check and clean the air lter periodically . When the indicators or a message prompts you to clean the air lter , comply with it as soon as possible. The air lter has two kinds of lters inside. Replace the lters when they are damaged or too soiled.
12 Using the CD manual The other manuals for this product are written into the included CD-ROM titled “User ’s Manual (detailed)”. Before using the CD-ROM, please read the following to ensure the proper use. System requir ements The system for using the CD-ROM requires the following.
13 ENGLISH R e gulator y notices Declaration of Conformity T rade name HIT ACHI Model Number CP-X201/CP-X301/CP-X401/CP-X450 Responsible Party Hitachi America, Ltd. Address 900 Hitachi way , Chula Vista, CA 91914-3556 U.S.A. T elephone Number +1 -800-225-1741 This device complies with part 15 of the FCC Rules.
14 Infor mation f or user s applicable in Eur opean Union countries 1. The manufacturer (Gemtek) hereby declare that this equipment (wireless network card), model SD-Link1 1g is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
15 ENGLISH Specications Item Specications Product name Liquid crystal projector Liquid Crystal Panel Panel size 1.6 cm (0.63 type) Drive system TFT active matrix Pixels 786,432 pixels (1024 horizontal x 768 vertical) Lens Zoom lens 8755H : F=2.3~2.
16 War ranty and after-ser vice If an abnormal operation (such as smoke, strange odor or excessive sound) should occur , stop using the projector immediately . Otherwise if a problem occurs with the projector , rst refer to the “T roubleshooting” of the “Operating Guide” in the CD and run through the suggested checks.
An important point after buying a device Hitachi 8916 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hitachi 8916 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hitachi 8916 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hitachi 8916 you will learn all the available features of the product, as well as information on its operation. The information that you get Hitachi 8916 will certainly help you make a decision on the purchase.
If you already are a holder of Hitachi 8916, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hitachi 8916.
However, one of the most important roles played by the user manual is to help in solving problems with Hitachi 8916. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hitachi 8916 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
