Instruction/ maintenance manual of the product 75 Hitachi
Go to page of 2
Operating Instructions OPERA TION 1. Check Driver Bit to make sure it is in good con- dition. • If it is broken or worn out, install a new one. 2. IMPORT ANT! Make sure the forward-reverse switch is in the forward position. 3. Insert a strip of screws into the feed track.
OPERATION CONT. 7. Press the nosepiece with constant force against the work surface. Do not remove the tool from work surface until the clutch disengages and the bit stops rotating, signaling a fully driven screw.
An important point after buying a device Hitachi 75 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hitachi 75 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hitachi 75 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hitachi 75 you will learn all the available features of the product, as well as information on its operation. The information that you get Hitachi 75 will certainly help you make a decision on the purchase.
If you already are a holder of Hitachi 75, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hitachi 75.
However, one of the most important roles played by the user manual is to help in solving problems with Hitachi 75. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hitachi 75 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
