Instruction/ maintenance manual of the product 2064.4 American Standard
Go to page of 7
M968924 Rev.1.3 2064.400 SERIN ™ 3 5 4 4 Cer tified to comply with ANSI A112.18.1 Installation Instructions Bidet Faucet and T ransfer V alve with Speed Connect™ Drain T ur n off hot and cold water supplies before beginning.
M968924 Rev.1.3 POP-UP DRAIN Tighten TAILPIECE (4) on DRAIN BODY before installing DRAIN BODY. Fig. B. 7 3 5 4 FLANGE GASKET Check DRAIN FLANGE in B IDET to ensure that W HITE FOAM GASKET (1) is fully compressed and not visible.
M968924 Rev.1.3 Connect HOT water supply to inlet of left SHANK and COLD water supply to right SHANK using sealant, appropriate connectors, and COUPLING NUTS. Connect 1-1/4” O.D. tailpiece on POP-UP DRAIN to waste outlet. 10 Connect water supply to V AL VE BODIES (7,7a) with 1/2" IPS FLEXIBLE SUPPLIES (8) or 3/8" O.
M968924 Rev.1.3 CHECK DRAIN CONNECTIONS 12 11 13 14 15 TEST INST ALLED FITTING With HANDLES (1) in OFF position, turn on W A TER SUPPLIES (2) and check all connections for leaks. Operate both HANDLES (1) to flush water lines thoroughly . Rotate TRANSFER V AL VE (5) from rim wash to spray several times to check operation.
M968924 Rev.1.3 Speed Connect™ Drain Troubleshooting Guide Disconnect the Cable from the Drain by threading the Cable Connector (1) counter-clockwise. Fig. A. Look at the area on the Drain Body where the Cable was attached and locate the component labeled as “Cam” and “Cam Cap” in the illustration.
M968924 Rev.1.3 STOPPER INSTALLATION PROCEDURE Locked Mode: Look at the Plastic Loop at the bottom of the Stopper and notice that the Loop is on one side of the Stopper.
M968924 Rev.1.3 024220-0070A COUPLING NUT HOT LINE FOR HELP For toll-free information and answers to your questions, call: 1 (800) 442-1902 W eekdays 8:00 a.m. to 6:00 p.m. EST IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093) W eekdays 8:00 a.m. to 7:00 p.
An important point after buying a device American Standard 2064.4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought American Standard 2064.4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data American Standard 2064.4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, American Standard 2064.4 you will learn all the available features of the product, as well as information on its operation. The information that you get American Standard 2064.4 will certainly help you make a decision on the purchase.
If you already are a holder of American Standard 2064.4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime American Standard 2064.4.
However, one of the most important roles played by the user manual is to help in solving problems with American Standard 2064.4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device American Standard 2064.4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
