Instruction/ maintenance manual of the product RB403N4EW1 Hisense
Go to page of 19
RB403N4EW1 RB403N4EY1 RB403N4EC1 RB403N4EC2.
Content s Brief introduction Important safety instructions General safety and daily use ● Don't try to repair the appliance yourself. It is dangerous to alter the specifications or modify this product in any way . Any damage to the cord may cause short circuit, fire or electric shock.
Safety for children and infirm persons Safety about electricity ● ● ● ● ● ● ● ● ● ● Unpack the appliance and check through the appliance. Should any damage be evident, don't plug in the appliance but contact the shop immediately from which you purchased it.
The refrigerant and risk of fire Inst alling your new appliance V entilation of appliance ● ● ● ● ● ● ● ● ● ● ● 75 100 100 Before using the appliance for the first time, you should be informed of the following tips.
Climate class Ambient temperature SN N ST T +10°C to +32°C +16°C to +32°C +16°C to +38°C +16°C to +43°C It may not work properly if being left at a temperature above or below the indicated range for a long period. Stand your appliance in a dry place to avoid high moisture.
③ Upper cover of upper door ② Upper hinge cover (right) ① Uppe r cover ④ Corn er cove r 3. T ake down the corner cover . Note: Please hold the upper door by hand during step 4 to prevent door dropping. 4. Remove the screws ①, and remove part ②.
8. Change screw hole covers on middle cover plate from left to right (as shown in figure below). 9. Place refrigerator flatwise, remove part ③ and then loose screws ④. Remove part ② and part ①. 10. Screw out lower hinge, change it to the near hole site, and then screw up and mount washer .
14. Move the upper door to appropriate position, adjust part ① and upper door , then fix part ① by screws ②. (Please hold upper door by hand when installing) ① ② 15. Install part the upper hinge cover ( which is in the plastic bag). 16.Reverse part ① by 180°and install it onto the right corner of upper door ， then mount part ②.
Description of the appliance Cabinet 2.Display board part 3.KED light 4.Glass shelf 5.Crisper cover 6.Fruit and vegetables crisper 7.Upper freezer drawer 8.Upper freezer glass shelf 9.Middle freezer drawer(huge box) 10.Middle freezer glass shelf 1 1.Lower freezer drawer 12.
Description of the appliance Cabinet 2.Display board part 3.KED light 4.Glass shelf 5.Crisper cover 6.Fruit and vegetables crisper 7.Crisper cover of Moisture 0 Cool 8.Moisture 0 Cool 9.Upper freezer drawer 10.Upper freezer glass shelf 1 1.Middle freezer drawer(huge box) 12.
Display controls Controlling the temperature We recommend that when you start your refrigerator for the first time, the temperature for the refrigerator is set to 4°C and the freezer to -18°C. If you want to change the temperature, follow the instructions below .
● ● ● ● nutrients of fresh food and keep food fresh longer . Press the middle part of button for 3 seconds to activate the super freeze function. The light will come on. In case of the maximum amount of food to be frozen, please wait about 24 h.
Using you r appliance Yo u appliance has the accessories as the " Description of the appliance ”showed in general , with this part instr uction you can have the rig ht wa y to use them . Door rack It is suitable for the storage of eggs, canned liquid, bottled drinks and packed food, etc.
Help ful hint s and tip s ● ● ● refrigerator or freezer , the internal temperature will increase resulting in the compressor having to work harder and will consume more energy . Do cover or wrap the food ， particularly if it has a strong flavor .
Cleaning and care For hygienic reasons the appliance (including exterior and interior accessories) should be cleaned regularly at least every two months. Caution! The appliance must not be connected to the mains during cleaning. Danger of electrical shock! Before cleaning switch the appliance off and remove the plug from the mains socket.
T r oubleshooting If you experience a problem with your appliance or are concerned that the appliance is not functioning correctly , you can carry out some easy checks before calling for service, please see below . Y ou can carry out some easy checks according to this section before calling for service.
Problem Check whether the power cord is plugged into the power outlet properly . Check the fuse or circuit of your po wer supply , replace if necessary . The ambient temperature is too low . Tr y setting the chamber temperature to a colder level to solve this problem .
is preventing the doors from closing . W ater drips on the floor The water pan ( located at the rear bottom of the cabinet ) may not be properly leve led , or the draining spout （ located underneath the top of the compressor depot ） may not be properly positioned to direct water into this pan , or the water spout is blocked .
+LVHQVH8./WG 8QLW'*OREDO$YHQXH 0LOOVKDZ /HHGV /635 7HO )D[.
An important point after buying a device Hisense RB403N4EW1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hisense RB403N4EW1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hisense RB403N4EW1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hisense RB403N4EW1 you will learn all the available features of the product, as well as information on its operation. The information that you get Hisense RB403N4EW1 will certainly help you make a decision on the purchase.
If you already are a holder of Hisense RB403N4EW1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hisense RB403N4EW1.
However, one of the most important roles played by the user manual is to help in solving problems with Hisense RB403N4EW1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hisense RB403N4EW1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
