Instruction/ maintenance manual of the product PDP4220EU Hisense Group
Go to page of 25
PDP4220EU USER'S MANUAL PDP COLOUR TV Part No: IES050723.
The presence of certain substances can have harmful effects on the environment. This apparatus profits from a specific treatment of recycling for the re-use of the matters which make it up. This apparatus must be thrown only to the places envisaged. Inform near your authority to know the places of electronic collection of waste.
OSD Language Settings Using the OSD settings menu CHANGE P ASSWORD 1) Press the MENU button to enter the main menu. 2) Press the [VOL+ or VOL-] button to select the item OSD settings.
-1- WARNING: T O PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. IMPORT ANT SAFEGUARD FIRE AND SHOCK PRECAUTIONS Adequate ventilation must be provided to prevent heat build up inside unit. Keep the inside of unit free from foreign objects, such as hairpins, nails, paper , etc.
- 2 - Stand installation WARNING: T O PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. ST AND IN ST ALLA TION Fig.1 Fig.2 STAND INSTALLA TION If the TV is to be desktop mounted 1.You will T ake out stand from accessory box and put aside level flat roof , and then support groupware like fig.
- 3 - Selecting a location for the TV 1)Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen. 2)Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause overheating, which may damage the TV .
Note: The above figures are for reference only , please refer to the actual units to determine their appearance. - 4 - 13 14 16 16 17 17 15 15 18 19 20 22 Preparation for Using your new TV 12 11 21 23.
B R SCART2 SCART1 1 STB ANT LEFT CENTER S.L RIGHT SUBWOOFER S.R S/PDIF VGA P R C V Y P B S-VIDEO VCD, DVD Preparation for Using your new TV Caution: Do not plug the TV in until you have finished connecting all of your equipment.
Preparation for Using your new TV T o enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor antenna (not supplied). Perfect picture quality requires a good signal and generally means that an outdoor antenna must be used.
Preparing the remote control for use Installing the remote control batteries 1. Open the battery cover on the back of the remote control. 2. Install two AAA size(1.5V) batteries. Match the + and - signs on the batteries to the signs on the battery compartment.
Learning about the remote control Using the remote control - 8- Return to previous channel Recall : s e l e c t i o n c h a n n e l Direct P.Mode :Select picture mode Power :Power on/off VOL -:Volume .
Using the TV features - 9- Select channels by [ CH+/CH- ] MENU SOURCE VOL CH Basic Operations Multimedia - TV receiver , Video monitor and PC display , all in one.
Using the TV features Power ON/ OFF Select channels by [ CH+/CH- ] You can also use[CH+ / CH-] to select channels. ndicates channel number increase; indicates channel number decrease. [CH+] i [CH-] Press [Display] button to display the present channel number, but it will also dis appear 3 seconds after your pressing.
Using the TV features - 11- Using the TV settings menu 1) Press the MENU button to enter the main menu. 2) Press the [VOL+ or VOL-] button to select the item TV settings. 3) Press the [CH+ or CH-] button to select Auto search and press the [ VOL+ ] button to enter Auto search .
-12 - Using the Picture menu Using the TV features PROGRAM Picture parameters Brightness Contrast Saturation Colour temp Sharpness 1) Press the [MENU] button to enter the main menu. 2) Press the button to select the item Picture Parameters. 3) Press the button to select the item you want to adjust.
-13 - Using the TV features OSD settings Using the OSD settings menu OSD po sition OSD ti meout OSD la nguage OSD lo ck Tra nsparency 1) Press the [MENU] button to enter the main menu. 2) Press the [VOL+ or VOL-] button to select the item OSD settings.
1) Press the MENU button to enter the main menu. 2) Press the [VOL+ or VOL-] button to select the item General settings 3) Press the [CH+ or CH-] button to select Factory reset. 4) Press the [ VOL+-] button to select Y es or No . Factory reset 1) Press the MENU button to enter the main menu.
-15- Using the TV features Teletext Operations Select the channel that is broadcasting the desired Teletext program. Press [ TEXT ] bu tton and alternate between T eletext mode and normal mode. Note: All the operati ons below should be under the Teletext mode except TIM E operation.
Size (top/bottom/full) Press the [ PC ] button to display the TOP HALF of the page. Press again to display the BOTTOM HALF of the page. Press again to return to a FULL P AGE display.
Also known as Peritel, this standard provides a cheap multi-signal connector to domestic TV and other video equipment. Arrangement 1 is the original and allows for composite video input/output, RGB inputs and stereo audio input/output. Arrangement 2 allows for composite video input/output,and stereo audio input/output.
SCART arrangement 2 Pin Signal Signal level Impedance 1 Audio output B (right) 0.5V rms <1kohm 2 Audio input B (right) 0.5V rms >10kohm 3 Audio output A (left) 0.
Troubleshooting Before calling a service technician, please check the following table for a possible cause of the problem and some solutions. Symptoms Possible Solutions TV will not turn on No picture.
-20- Specifications Television system Channel coverag e Multi- system(P AL,SECAM) VHF-L: E2-S8 VHF-H: S9-S37 UHF: S38-E69 PDP4220EU LCD panel 42 inch PDP Power source Power consumpt ion Audio output C.
Appendix PDP Wall-mounting Bracket Installation Guide READ CAREFULL Y BEFORE INSTALLA TION! THE INST ALLATION GUIDE SHOULD BE RET AINED FOR FUTURE REFERENCE. Caution: 1. Do NOT attempt to install the TV by yourself to avoid mistakes or hazard. Refer all installation to qualified servicing personnel.
Appendix -22-.
An important point after buying a device Hisense Group PDP4220EU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hisense Group PDP4220EU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hisense Group PDP4220EU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hisense Group PDP4220EU you will learn all the available features of the product, as well as information on its operation. The information that you get Hisense Group PDP4220EU will certainly help you make a decision on the purchase.
If you already are a holder of Hisense Group PDP4220EU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hisense Group PDP4220EU.
However, one of the most important roles played by the user manual is to help in solving problems with Hisense Group PDP4220EU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hisense Group PDP4220EU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
