Instruction/ maintenance manual of the product WSR1250-PE Hilti
Go to page of 12
WSR 900 WSR 900-PE WSR 1 250-PE WSR 1 400-PE *376750* 376750 Operating instructions en Mode d’emploi fr Manual de instrucciones es Hilti Corporation FL-9494 Schaan T el.: +423 / 234 21 1 1 Fax: +423 / 234 29 65 www .hilti.com Hilti = registered trademark of Hilti Corp.
W S R 9 0 0 - P E min.40mm 1– 6 2 3 W S R 12 5 0 - P E W S R 1 4 0 0 - P E V V V V V 2 4 5 6 7 min.40mm 3 min.40mm min.25mm W S R 9 0 0 - P E B A W S R 1 25 0 - P E W S R 1 4 0 0 - P E W S R 1 4 0 0.
1 en It is essential that the operating instructions are read before the tool is operated for the first time. Always keep these operating instructions together with the tool. Ensure that the operating instructions are with the tool when it is given to other persons.
2 en 2. General safety rules 1. WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury . SA VE THESE INSTRUCTIONS 2. Wo rk Area Keep your work area clean and well lit.
3 en 3. Specific safety rules and symbols 3.1 Basic information concerning safety In addition to the information relevant to safety given in each of the sections of these operating instructions, the following points must be strictly observed at all times.
4 en 3.3.2 Electrical ● Protect yourself against electric shock. Avoid body contact with earthed / grounded objects, e.g. pipes and radiators etc. ● Check the condition of the tool’ s supply cord at reg- ular intervals. The supply cord should be replaced by a trained electrical specialist if damage is found.
5 en 4. Functional description 4.1 Use of the WSR 900 / WSR 900-PE as directed ● T ypical working environments include rescue ser vices, public authorities, farming and forestry , general con- struc.
6 en 5. Assembly -NOTE- The electric supply voltage must comply with the infor- mation on the type plate. If extension cords are used: Use only extension cords of a type approved for the intended purpose and of ade- quate cross section. Failure to observe this point may result in reduced performance and may cause the cord to overheat.
7 en 6. Operation -NOTE- ● To ensure good cutting performance and ease the load on the tool, use only saw blades that are in good con- dition. ● Do not overload the tool. -WARNING- ● When working, always guide the tool away from the body . ● Lift the tool away from the workpiece only once the blade has come to a standstill.
8 en 7. Care and maintenance Unplug the supply cord from the mains socket. 7.1 Care of blades Clean off dirt and dust deposits and protect your blades from corrosion by wiping them from time to time with an oil-soaked rag. 7.2 Care of the tool ● Keep the blade clamp clean.
9 en 10. Disposal Most of the materials from which Hilti electric tools are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old electric tools for recycling.
10 en 11. Warranty Hilti warrants that the tool supplied is free of defects in material and workmanship. This warranty is valid so long as the tool is operated and handled correctly , cleaned and serv.
An important point after buying a device Hilti WSR1250-PE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hilti WSR1250-PE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hilti WSR1250-PE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hilti WSR1250-PE you will learn all the available features of the product, as well as information on its operation. The information that you get Hilti WSR1250-PE will certainly help you make a decision on the purchase.
If you already are a holder of Hilti WSR1250-PE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hilti WSR1250-PE.
However, one of the most important roles played by the user manual is to help in solving problems with Hilti WSR1250-PE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hilti WSR1250-PE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
