Instruction/ maintenance manual of the product ZXI60.4+1K Hifionics
Go to page of 14
ZXi200.2 ZXi40.4 / ZXi80.4 / ZXi150.4 ZXi60.4+1K.
INDEX P AGE General Installation Procedure..........................................................................................................................................................................................1 Amplifier Feature Descriptions.
GENERAL INST ALLA TION PROCEDURE 1 System Design Installation The success of any car stereo system relies on several factors, such as the system design, execution of the installation, and system setup. Please remember that any system is only as good as its weakest link.
AMPLIFIER FEA TURE DESCRIPTIONS ZEUS ZXi AMPLIFIERS: CAUTION: DO NOT OPERA TE ANY AMPLIFIER BELOW THE INTENDED IMPEDANCE. YOU Each model is capable of 4 & 2-Ohms stereo per channel, or 4-Ohms mono.
POWER INPUT GND REM BATT+12V SPEAKER OUTPUT RIGHT LEFT - + - + BRIDGED FUSE HP FULL LP/BP 10Hz 15KHz 30Hz 150Hz 0dB 10dB 6V 0.2V REMOTE HI PASS LOW P ASS BASS EQ LEVEL POWER X-OVER PROTECT LINE INPUT L R L R LINE OUT POWER INPUT GND REM BATT+12V SPEAKER OUTPUT RIGHT LEFT - + - + BRIDGED FUSE HP FULL LP/BP 10Hz 15KHz 30Hz 150Hz 0dB 10dB 6V 0.
POWER INPUT GND REM BATT+12V CH 1/2 SPEAKER OUTPUT CH 3/4 RIGHT LEFT RIGHT LEFT - + - + - + - + BRIDGED BRIDGED FUSE LINE INPUT REMOTE POWER PROTECT LINE OUT HI FULL LP/BP HI FULL LP/BP 6V 0.2V 10Hz-15KHz 30Hz-150Hz 0dB-10dB HI PASS LOW PASS BASS EQ LEVEL X-OVER 1 / 2 CH 6V 0.
POWER INPUT GND REM BATT+12V SPEAKER OUTPUT RIGHT LEFT - + - + BRIDGED FUSE HP FULL LP/BP 10Hz 15KHz 30Hz 150Hz 0dB 10dB 6V 0.2V REMOTE HI PASS LOW P ASS BASS EQ LEVEL POWER X-OVER PROTECT LINE INPUT .
ZXi60.4+1K 5-CHANNEL AMPLIFIER APPLICA TIONS 6 5 channel discrete, one being mono low pass Single Set of Stereo RCA ’ s - CH 3 / 4 X-OVER: FULL Y ou can use this configuration simply as 4 discrete full range channels, with a 5th low pass channel. All of the crossovers are bypassed , except the LOW P ASS on channel 5.
7.
8 SETTING UP SYSTEMS AFTER INST ALLA TION FOR BEST PERFORMANCE Channel 5 on the ZXi60.4+1K General: At this point you are ready to get more specific on the settings for your amplifier . Bass EQ: This setting is a fixed bass boost at 45Hz that is variable from 0-10dB.
TROUBLESHOOTING A SYSTEM 9 The key to finding the problem in a misbehaving sound system is to isolate parts of that system in a logical fashion to track down the fault. Description of the PROTECT system built into all Hifonics amplifiers The diagnostic system will shut down the amplifier , until reset by turning the head unit off, and back on.
10 As the manufacturer of Maxxsonics, MB Quart, Autotek, Crunch and Hifonics car audio products, Maxxsonics USA Inc. W arrants to the origina l consumer purchaser the amplifier to be free from defects in material and workmanship for one (1) Y ear from date of purchase.
1 1 OEM Integration Accessories MX-1 Premium High T o Low Level Converter Low Level Outputs * High Level Inputs: Accepts all types of High level Inputs including floating ground and high voltages up to 30 volts. * Audio Signal Sense / Hardwire T urn-On: Audio sense detects music signals from the OEM wires and activates the MX-1.
P AR T#: A1209.
An important point after buying a device Hifionics ZXI60.4+1K (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hifionics ZXI60.4+1K yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hifionics ZXI60.4+1K - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hifionics ZXI60.4+1K you will learn all the available features of the product, as well as information on its operation. The information that you get Hifionics ZXI60.4+1K will certainly help you make a decision on the purchase.
If you already are a holder of Hifionics ZXI60.4+1K, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hifionics ZXI60.4+1K.
However, one of the most important roles played by the user manual is to help in solving problems with Hifionics ZXI60.4+1K. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hifionics ZXI60.4+1K along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
