Instruction/ maintenance manual of the product ZRX1000.4 Hifionics
Go to page of 14
ZRX500.2 / ZRX1200.2 ZRX600.4 / ZRX1000.4 / ZRX2000.4 ZRX1000.1D / ZRX1500.1D / ZRX2000.1D / ZRX3000.1D.
INDEX P AGE General Installation Procedure..........................................................................................................................................................................................1 Amplifier Feature Descriptions.
GENERAL INST ALLA TION PROCEDURE 1 System Design Installation The success of any car stereo system relies on several factors, such as the system design, execution of the installation, and system setup. Please remember that any system is only as good as its weakest link.
AMPLIFIER FEA TURE DESCRIPTIONS ZEUS ZRX AMPLIFIERS: 2 ZRX1000.1D / ZRX1500.1D / ZRX2000.1D / ZRX3000.1D 1-CHANNEL AMPLIFIERS The 4 channel amps have the same features as the 2 channel models accept that there are 2 sets of controls. 1 set for channels 1 & 2 and 1 set for channels 3 & 4.
3 ZRX500.2 / ZRX1200.2 2-CHANNEL AMPLIFIER APPLICA TIONS 4. Line Level: This is the most basic application for the ZRX Series 2 channel amplifiers. Refer to the section “Setting up systems after installation for best performance” 1. Interconnect cable checklist: Connect the LINE INPUTS to the Radio/CD with good quality RCA cables.
POWER INPUT GND REM BATT+12V CH 1/2 SPEAKER OUTPUT CH 3/4 RIGHT LEFT RIGHT LEFT - + - + - + - + BRIDGED BRIDGED FUSE ZRX600.4 / ZRX1000.4 / ZRX2000.4 4-CHANNEL AMPLIFIER APPLICA TIONS 4 CHANNEL FULL R.
5 Front/Rear high pass, using a 2 channel amplifier for mono sub bass Channels 1/2: The combination of a 2 and a 4 channel amplifier , utilizing their built in - HI P ASS: 100 Hz crossovers, makes it a snap to put together a full system with front and rear highs, with mono sub bass.
ZRX1000.1D / ZRX2000.1D / ZRX3000.1D 1-CHANNEL AMPLIFIER APPLICA TIONS 6 POWER INPUT BATT+12V GND SPEAKER OUTPUT REM - - + + POWER INPUT GND REM BATT+12V SPEAKER OUTPUT - - + + FUSE Basic application .
7.
8 SETTING UP SYSTEMS AFTER INST ALLA TION FOR BEST PERFORMANCE ZRX1000.1D / ZRX1500.1D / ZRX2000.1D / ZRX3000.1D General: At this point you are ready to get more specific on the settings for your amplifier . Subsonic: This setting acts as a low frequency cut off for your system bass reproduction.
TROUBLESHOOTING A SYSTEM 9 The key to finding the problem in a misbehaving sound system is to isolate parts of that system in a logical fashion to track down the fault. Description of the PROTECT system built into all Hifonics amplifiers The diagnostic system will shut down the amplifier , until reset by turning the head unit of f, and back on.
10 As the manufacturer of Maxxsonics, MB Quart, Autotek, Crunch and Hifonics car audio products, Maxxsonics USA Inc. W arrants to the original consumer purchaser the amplifier to be free from defects in material and workmanship for one (1) Y ear from date of purchase.
1 1 OEM Integration Accessories MX-1 Premium High T o Low Level Converter Low Level Outputs * High Level Inputs: Accepts all types of High level Inputs including floating ground and high voltages up to 30 volts. * Audio Signal Sense / Hardwire T urn-On: Audio sense detects music signals from the OEM wires and activates the MX-1.
P AR T#: A81 1.
An important point after buying a device Hifionics ZRX1000.4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hifionics ZRX1000.4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hifionics ZRX1000.4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hifionics ZRX1000.4 you will learn all the available features of the product, as well as information on its operation. The information that you get Hifionics ZRX1000.4 will certainly help you make a decision on the purchase.
If you already are a holder of Hifionics ZRX1000.4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hifionics ZRX1000.4.
However, one of the most important roles played by the user manual is to help in solving problems with Hifionics ZRX1000.4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hifionics ZRX1000.4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
