Instruction/ maintenance manual of the product HS500.4 Hifionics
Go to page of 13
SAMSON HS300.4 / HS500.4 / HS800.4 HS1500.1D / HS2500.1D.
INDEX P AGE General Installation Procedure..........................................................................................................................................................................................1 Amplifier Feature Descriptions.
GENERAL INST ALLA TION PROCEDURE 1 System Design Installation The success of any car stereo system relies on several factors, such as the system design, execution of the installation, and system setup. Please remember that any system is only as good as its weakest link.
AMPLIFIER FEA TURE DESCRIPTIONS SAMSON AMPLIFIERS: - CAUTION: DO NOT OPERA TE ANY AMPLIFIER BELOW THE INTENDED IMPEDANCE. YOU - Each model is capable of 4 & 2-Ohms stereo per channel, or 4-Ohms mo.
HS300.4 / HS500.4 / HS800.4 4-CHANNEL AMPLIFIER APPLICA TIONS 4 CHANNEL FULL RANGE SYSTEM 2 or 3 CHANNEL SYSTEM - HI P ASS: N/A Here we show how to use the 4 channel amplifiers as straight forward discrete 4 - LOW P ASS: N/A channel full range units.
HS300.4 / HS500.4 / HS800.4 4-CHANNEL AMPLIFIER APPLICA TIONS Front/Rear high pass, using a mono amplifier for mono sub bass The combination of a 1 and a 4 channel amplifier , utilizing their built in Channels 3/4: crossovers, makes it a snap to put together a full system with front and rear highs, with mono sub bass.
Basic application Interconnect cable checklist: Crossover frequency control checklist: Connect the inputs to a suitable source, e.g. a head unit with good quality RCA cables. LOW P ASS: 40Hz to 150Hz Connect the LINE OUT to the inputs of the system highs amplifier.
6.
SETTING UP SYSTEMS AFTER INST ALLA TION FOR BEST PERFORMANCE HS1500.1D / HS2500.1D General: At this point you are ready to get more specific on the settings for your amplifier . SUBSONIC: This setting acts as a low frequency cut off for your system bass reproduction.
TROUBLESHOOTING A SYSTEM The key to finding the problem in a misbehaving sound system is to isolate parts of that system in a logical fashion to track down the fault. Description of the PROTECT system built into all Hifonics amplifiers The diagnostic system will shut down the amplifier , until reset by turning the head unit off, and back on.
As the manufacturer of Maxxsonics, MB Quart, Autotek, Crunch and Hifonics car audio products, Maxxsonics USA Inc. W arrants to the original consumer purchaser the amplifier to be free from defects in material and workmanship for one (1) Y ear from date of purchase.
OEM Integration Accessories MX-1 Premium High T o Low Level Converter Low Level Outputs * High Level Inputs: Accepts all types of High level Inputs including floating ground and high voltages up to 30 volts. * Audio Signal Sense / Hardwire T urn-On: Audio sense detects music signals from the OEM wires and activates the MX-1.
P AR T#: A710.
An important point after buying a device Hifionics HS500.4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hifionics HS500.4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hifionics HS500.4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hifionics HS500.4 you will learn all the available features of the product, as well as information on its operation. The information that you get Hifionics HS500.4 will certainly help you make a decision on the purchase.
If you already are a holder of Hifionics HS500.4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hifionics HS500.4.
However, one of the most important roles played by the user manual is to help in solving problems with Hifionics HS500.4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hifionics HS500.4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
