Instruction/ maintenance manual of the product HFI1500D Hifionics
Go to page of 15
HFi100.2 / HFi55.4 / HFi100.4 HFi1000D / HFi1500D HFi2000D / HFi2500D i.
INDEX P AGE General Installation Procedure..........................................................................................................................................................................................1 Amplifier Feature Descriptions.
GENERAL INST ALLA TION PROCEDURE 1 System Design Installation The success of any car stereo system relies on several factors, such as the system design, execution of the installation, and system setup. Please remember that any system is only as good as its weakest link.
AMPLIFIER FEA TURE DESCRIPTIONS HFi AMPLIFIERS: ! Each model is capable of 4 & 2-Ohms stereo per channel, or 4-Ohms mono bridged operation ! All Hifonics amplifiers feature a comprehensive diagnostic system, with speaker lead short circuit, and amplifier DC faults indicated by the red “ PROTECT” LED.
OUTPUT INPUT L L R R 6V 0.2V 0dB 12dB FULL LPF HPF 60Hz 12KHz 30Hz 250Hz MONO STEREO LEVEL BASS EQ X-OVER HPF LPF MODE POWER PROTECT POWER INPUT GND REM BATT+12V SPEAKER OUTPUT RIGHT LEFT - + - + BRIDGED FUSE H F OUTPUT INPUT L L R R 6V 0.
HFi55.4 / HFi100.4 4-CHANNEL AMPLIFIER APPLICA TIONS 4 CHANNEL FULL RANGE SYSTEM 2 or 3 CHANNEL SYSTEM - HI P ASS: N/A Here we show how to use the 4 channel amplifiers as straightforward discrete 4 - LOW P ASS: N/A channel full range units.
HFi55.4 / HFi100.4 4-CHANNEL AMPLIFIER APPLICA TIONS 5 Front/Rear high pass, using a 2 channel amplifier for mono sub bass Channels 1/2: The combination of a 2 and a 4 channel amplifier , utilizing their built in - HI P ASS: 100 Hz crossovers, makes it a snap to put together a full system with front and rear highs, with mono sub bass.
POWER INPUT BATT+12V GND SPEAKER OUTPUT REM - - + + H F OUTPUT INPUT L L R R POWER PROTECT 6V 0.2V 0dB 10dB 15Hz 35Hz 30Hz 250Hz LEVEL BASS EQ REMOTE SUBSONIC LOW P ASS POWER INPUT GND REM BATT+12V SPEAKER OUTPUT - - + + FUSE H F OUTPUT INPUT L L R R POWER PROTECT 6V 0.
7.
8 SETTING UP SYSTEMS AFTER INST ALLA TION FOR BEST PERFORMANCE HFi1000D / HFi1500D / HFI2000D / HFi2500D General: At this point you are ready to get more specific on the settings for your amplifier . Subsonic: This setting acts as a low frequency cut off for your system bass reproduction.
TROUBLESHOOTING A SYSTEM 9 The key to finding the problem in a misbehaving sound system is to isolate parts of that system in a logical fashion to track down the fault. Description of the PROTECT system built into all Hifonics amplifiers The diagnostic system will shut down the amplifier , until reset by turning the head unit off, and back on.
10 As the manufacturer of Maxxsonics, MB Quart, Autotek, Crunch and Hifonics car audio products, Maxxsonics USA Inc. W arrants to the origina l consumer purchaser the amplifier to be free from defects in material and workmanship for one (1) Y ear from date of purchase.
1 1 OEM Integration Accessories MX-1 Premium High T o Low Level Converter Low Level Outputs * High Level Inputs: Accepts all types of High level Inputs including floating ground and high voltages up to 30 volts. * Audio Signal Sense / Hardwire T urn-On: Audio sense detects music signals from the OEM wires and activates the MX-1.
12 Accessories LEVEL BYP ASS NORMAL RED - CLIP GREEN - 9V -20dB 0dB -6dB INPUT LEVEL PHASE BOOST P ARAMETRIC BASS EQ BANDWIDTH FREQUENCY 0.2V 180 +10 dB 100Hz 9V 0 0dB 30Hz MA XX-LINK MLX-100 SUBSONIC.
P AR T#: A1 109.
An important point after buying a device Hifionics HFI1500D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hifionics HFI1500D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hifionics HFI1500D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hifionics HFI1500D you will learn all the available features of the product, as well as information on its operation. The information that you get Hifionics HFI1500D will certainly help you make a decision on the purchase.
If you already are a holder of Hifionics HFI1500D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hifionics HFI1500D.
However, one of the most important roles played by the user manual is to help in solving problems with Hifionics HFI1500D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hifionics HFI1500D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
