Instruction/ maintenance manual of the product GLX1800.1D Hifionics
Go to page of 16
GLX60.4 / GLX100.4 GLX1000.1D / GLX1400.1D GLX1800.1D / GLX2200.1D.
HIGH PERFORMANCE AMPLIFIERS HIFONICS GLADIA T OR INDEX P AGE The Gladiator Series products have been designed to a very high level of performance, with features unavailable in any other product.
GENERAL INST ALLA TION PROCEDURE 1 System Design The success of any car stereo system relies on several factors, such as the system design, execution of the installation, and system setup. Please remember that any system is only as good as its weakest link.
AMPLIFIER FEA TURE DESCRIPTIONS 2 GLADIA TOR AMPLIFIERS: A POWER LED indicates the powered up and turned on condition. Each model is capable of 4 & 2-Ohms stereo per channel, or 4-Ohms mono bridge.
3 GLX60.4 / GLX100.4 4-CHANNEL AMPLIFIER APPLICA TIONS POWER INPUT GND REM BATT+12V CH 1/2 SPEAKER OUTPUT CH 3/4 RIGHT LEFT RIGHT LEFT - + - + - + - + BRIDGED BRIDGED FUSE LINE INPUT REMOTE POWER PROTECT LINE OUT HI FULL LP/BP HI FULL LP/BP 6V 0.2V 10Hz-15KHz 30Hz-150Hz 0dB-10dB HI PASS LOW PASS BASS EQ LEVEL X-OVER 1 / 2 CH 6V 0.
INPUT OUTPUT INPUT LEVEL PHASE REMOTE BASS EQ SONIC LOW P ASS L L R R SUB POWER PROTECT BALANCED 9V 0.2V 0 180 0dB 10dB 15Hz 35Hz 35Hz 250Hz SPEAKER OUTPUT - - + + GND REM BATT+12V POWER INPUT FUSE RE.
Interconnect cable checklist: Level control checklist: - Connect the line inputs to a Radio/CD RCA outputs or line output of the - Refer to the section “Setting up systems after installation for best full range primary amplifier with good quality RCA cables.
INPUT OUTPUT INPUT LEVEL PHASE REMOTE BASS EQ SONIC LOW P ASS L L R R SUB POWER PROTECT BALANCED 9V 0.2V 0 180 0dB 10dB 15Hz 35Hz 35Hz 250Hz BATT+12V GND POWER INPUT SPEAKER OUTPUT REM - - + + INPUT OUTPUT INPUT LEVEL PHASE REMOTE BASS EQ SONIC LOW P ASS L L R R SUB POWER PROTECT BALANCED 9V 0.
INPUT OUTPUT INPUT LEVEL PHASE REMOTE BASS EQ SONIC LOW PASS L L R R SUB IN OUT POWER PROTECT OUTPUT MASTER INPUT SLAVE BALANCED 9V 0.2V 0 180 0dB 10dB 15Hz 35Hz 35Hz 250Hz BATT+12V GND POWER INPUT SP.
8 SETTING UP SYSTEMS AFTER INST ALLA TION FOR BEST PERFORMANCE GLX1000.1D / GLX1400.1D / GLX1800.1D / GLX2200.1D General: At this point you are ready to get more specific on the settings for your amplifier . Subsonic: This setting acts as a low frequency cut off for your system bass reproduction.
TROUBLESHOOTING A SYSTEM 9 The key to finding the problem in a misbehaving sound system is to isolate parts of that system in a logical fashion to track down the fault. Description of the Diagnostic system built into all HIFONICS amplifiers The diagnostic system will shut down the amplifier , until reset by turning the head unit off, and back on.
10.
As the manufacturer of Maxxsonics, MB Quar t, Autotek, Cr unch and Hif onics car audio products, Maxxsonics USA Inc. War rants to the original consumer pur chaser the amplifier to be free fr om defects in ma terial and workmanship for one (1) Y ear fr om date of pur chase.
12 Accessories LEVEL BYP ASS NORMAL RED - CLIP GREEN - 9V -20dB 0dB -6dB INPUT LEVEL PHASE BOOST P ARAMETRIC BASS EQ BANDWIDTH FREQUENCY 0.2V 180 +10 dB 100Hz 9V 0 0dB 30Hz MA XX-LINK MLX-100 SUBSONIC.
13 OEM Integration Accessories MX-1 Premium High T o Low Level Converter Low Level Outputs * High Level Inputs: Accepts all types of High level Inputs including floating ground and high voltages up to 30 volts. * Audio Signal Sense / Hardwire T urn-On: Audio sense detects music signals from the OEM wires and activates the MX-1.
P ART#: A101 1.
An important point after buying a device Hifionics GLX1800.1D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hifionics GLX1800.1D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hifionics GLX1800.1D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hifionics GLX1800.1D you will learn all the available features of the product, as well as information on its operation. The information that you get Hifionics GLX1800.1D will certainly help you make a decision on the purchase.
If you already are a holder of Hifionics GLX1800.1D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hifionics GLX1800.1D.
However, one of the most important roles played by the user manual is to help in solving problems with Hifionics GLX1800.1D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hifionics GLX1800.1D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
