Instruction/ maintenance manual of the product MP-941 Henny Penny
Go to page of 18
Henny Penny Mod el MP-941/942/943/944 Henny Penny Multipurpose Holding Cabinet Model MP-941 Model MP-942 Model MP-943 Model MP-944 OPERATOR’S MANUAL.
Model MP-941/942/943/944 LIMITED WARRANTY FOR HENNY PENNY EQUIPMENT Subject to the fol lowing con ditions, He nny Penny Co rporati on makes the following limited warranties to the original purchaser o.
Model MP-941/942/943/944 TABLE OF CONTENTS Section Page Section 1. INTRODUCTION ....................................................................................................... ....1-1 1-1. Multipurpose Holding Cabinet .........................
Model MP-941/942/943/944 SECTION 1. INTRODUCTION 1-1. MULTIPURPOSE The Henny Penny Multipurpose Holding Cabinet HOLDING CABINET is a basic unit of food equipment designed to hold hot foods at proper temper ature in commercial food operations. This cabinet will keep hot foods hum id while maintaining tem perature.
Model MP-941/942/943/944 1-5. SAFETY The only way to ensure safe operation of the Henny Penny Multipurpose Holding Cabinet is to fully understand the proper in stallation, operation and maintenance procedures. The in structions in this manual have been prepared to aid you in learning the proper procedures.
Model MP-941/942/943/944 SECTION 2. INSTALLATION 2-1. INTRODUCTION This section provides the installation instructions for the Henny Penny Multipurpose Holding Cabinet.
Model MP-941/942/943/944 2-2. UNPACKING (Continued) 4. Open drawers and remove the packing or literature that is inside. 5. Pull off any protective cove ring from the exterior of the cabinet. 6. Your multipurpose holding cabinet is now ready for location and setup.
Model MP-941/942/943/944 2-4. CABINET DIMENSIONS MP-941 1 0 3 2 - 3.
Model MP-941/942/943/944 2-4. CABINET DIMENSIONS (Continued) 2-4 103.
Model MP-941/942/943/944 SECTION 3. OPERATION 3-1. INTRODUCTION This section provides oper ating procedures for the multipurpose holding cabinets. Read the Introduction, Installation and Operation Sec tions, and all instructions should be followed before operating the cabinet.
Model MP-941/942/943/944 3-2. OPERATING CONTROLS AND COMPONENTS (Continued) Figure 3-1 3-3. START-UP Before using the cabinet, it should be thoroughly cleaned as described in the cleaning procedures section of this manual.
Model MP-941/942/943/944 3-3. START-UP (Continued) 1. Turn the POWER switch to the ON position. 2. The display will show the time of day or “ON”. Press and hold the appropriate drawer button to view the actual temperature of the drawer.
Model MP-941/942/943/944 3-5. CLEANING (Continued) 5. Clean the interior of the cabinet thoroughly with a cloth and soapy water. Do not use steel wool, other abrasive cleaners or cleaners/sanitizers con taining chlorine, bromine, iodine or ammonia chemicals, as these will deteriorate the stainle ss steel material and shorten the life of the unit.
Model MP-941/942/943/944 3-6. OPERATION AND 2. While holding in on the drawer button, press and PROGRAMMING release the SET button. Now the setpoint temperature (Continued) will be blinking at a faste r rate. Now release the drawer button. 3. Press the UP and DOWN buttons to change the setpoint temperature.
Model MP-941/942/943/944 3-6. OPERATION AND Setting Control to the Correct Number of Draw ers PROGRAMMING (Continued) The different models, MP-941, 942, 943, and 944, all use the same control board. The boards are programmed at the factory for the correct unit.
Model MP-941/942/943/944 G L O S S A R Y HENNY PENNY HO LDING CABINETS air temperature probe a round devi ce located inside t he cabinet that measures t he inside air temperature an d sends that i nfo.
Model MP-941/942/943/944 probe clip a metal holder that attaches to the outside of the contro l panel to hold the food probe when not in use; the clip is an optional accessory product load capacity th.
*FM05 - 017 - E * Henny Penny Corp., Eaton, Ohio 45320, Revised 02- 21 -0 8 Henny Penny Corporation P.O.Box 60 Eaton,OH 45320 1-937-456-8400 1-937-456-8402 Fax Toll free in USA 1-800-417-8417 1-800-417-8434 Fax www.
An important point after buying a device Henny Penny MP-941 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Henny Penny MP-941 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Henny Penny MP-941 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Henny Penny MP-941 you will learn all the available features of the product, as well as information on its operation. The information that you get Henny Penny MP-941 will certainly help you make a decision on the purchase.
If you already are a holder of Henny Penny MP-941, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Henny Penny MP-941.
However, one of the most important roles played by the user manual is to help in solving problems with Henny Penny MP-941. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Henny Penny MP-941 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
