Instruction/ maintenance manual of the product DCW-2 Henny Penny
Go to page of 18
Henny Penny Display Counter Warmer Model DCW-2 OPERATOR’S MANUAL.
.
LIMITED WARRANTY FOR HENNY PENNY EQUIPMENT Subject to t he follo wing condi tions, He nny Penny Corporat ion makes the following limited warranties to the original purchaser only for Henny Penny appli.
TABLE OF CONTENTS Section Page Section 1. INTRODUCTION ........................................................................................................ 1 1-1. Heated Display Cabinet .............................................................
SECTION 1. INTRODUCTION 1-1. HEATED DISPLAY The Henny Penny Heated Display Cabinet is a basic unit of food CABINET processing equipment used to display the food product and maintain the temperature of hot foods in the comm ercial food service operation.
CAUTION used without the safe ty alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
SECTION 2. INSTALLATION 2-1. INTRODUCTION This section provides the installa tion instructions for the Henny Penny Heated Display Cabinet. Installation of this unit should be performed only by a qualified service technician. Do not puncture the skin of the unit with drills or screw s as component damage or electrical shock could result.
2-2. UNPACKING (Continued) Step 2 2. Open top flaps and remove packing. Step 3 3. Lift carton off skid. Step 4 4. Remove four bolts from under skid. The unit is now ready for location and set-up.
2-3. LOCATION Place the unit on a table, preferably with a cut-o ut opening below the cabinet to allow easy servic e connection s and serviceability. When setting up the Henny Penny Heated Display Cabinet, be sure to level the table. 2-4. ELECTRIC DATA TABLE Model Volts Phase Watts Amps DCW-2 120/230 1 760 4.
2-6. CABINET DIMENSIONS 6.
SECTION 3. OPERAT ING INSTRUCTIONS 3-1. INTRODUCTION This section provides operating proc edures for the heated display cabinets. The Introduction, Inst allation and Operation sections should be read, and all instruc tions should be followed before operating the cabinet.
3-2. OPERATING CONTROLS (Continued) Figure 3-5 Figure 3-6 Figure 3-7 8.
3-2. OPERATING CONTROLS (Continued) Fig . No. Item No. Description Function 3-1 1 Radiant Heat A time proportioning controller, which means the higher Infinite Regulator the number setti ng, the great.
3-3. START-UP Before using, the Henny Penny Heated Display Cabinet should be thoroughly cleaned as indicated in the Shut-Down and Cleanup section of this manual. 1. Move all switches and cont rols on th e cabinet to the OFF position. 2. Turn on power supply for the cabinet at the main circuit breaker.
3-5. SHUT-DOWN AND CLEANUP 1. Turn the radiant heat to OFF 2. Open the doors. 3. Remove all the pans. 4. Remove the grids from the lower level and clean with soap and water at sink.
SECTION 4. TROUBLESHOOTING 4-1. TROUBLESHOOTING GUIDE PROBLEM CAUSE CORRECTION Product not hold ing z Doors are not kept closed z Product held too long z Temperature too low z Radiant heat too low z L.
G L O S S A R Y HENNY PENNY HO LDING CABI NETS air temperature probe a round devi ce located inside t he cabinet that measures the i nside air temperature an d sends that inf ormation to t he control .
parameters a preset group of setpoint s designed for h olding specific food products at certain temperature and humidity levels power switch the ON/OFF switch that sends electri city to the unit’s o.
An important point after buying a device Henny Penny DCW-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Henny Penny DCW-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Henny Penny DCW-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Henny Penny DCW-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Henny Penny DCW-2 will certainly help you make a decision on the purchase.
If you already are a holder of Henny Penny DCW-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Henny Penny DCW-2.
However, one of the most important roles played by the user manual is to help in solving problems with Henny Penny DCW-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Henny Penny DCW-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
