Instruction/ maintenance manual of the product CMC/CMR-105 Henny Penny
Go to page of 7
Henny Penny Model CMC/CMR-1 03,104,105,106,107 3-1. INTRODUCTION This section provides explanations of all controls, along with operating procedures and daily maintenance. Read the Introduction, Installation and Opeation Sections before operating the unit.
Henny Penny Model CMC/CMR-1 03,104,105,106,107 Figure 3-1 3 2 1 4 5 303 3-2 3-2. OPERA TING CONTROLS (Continued).
Henny Penny Model CMC/CMR-1 03,104,105,106,107 3-3. BASIC OPERA TION 1 . T urn power switch to ON position. 2. W ait for temperature to reach operating temperature, 34 to 38° F (1.1 to 3.3° C). 3. Place chilled product into case. Do not block the air return and air discharge vents with product.
Henny Penny Model CMC/CMR-1 03,104,105,106,107 3-4. CLEANING Every 3 Months: (Continued) 1 . Remove all electrical power supplied to the unit by unplugging the power cord from the wall, or by turning off the wall circuit breaker . 2. Remove all product from the unit.
Henny Penny Model CMC/CMR-1 03,104,105,106,107 3-5. PROGRAMMING 1. Press and hold for 4 seconds. The “DEF/SET” light flashes in display . T emperatur e Setpoint 2. Press the or to change the temperature setpoint, within 5 seconds. After 5 seconds, the last entered setpoint stays in memory .
Henny Penny Model CMC/CMR-1 03,104,105,106,107 3-5. PROGRAMMING dS: defrost system (computation); dF=digifrost Feature; Continued defrost start time based on total compressor running time rt=real time.
Henny Penny Model CMC/CMR-1 03,104,105,106,107 3-6. FLUORESCENT BULB U L Units REPLACEMENT 1. Pull the bulb out of the sockets. 2. Remove the bulb guard caps. 3. Install new fluorescent bulb in reverse order . CE Units 1. Remove the bulb cover . 2. Rotate the bulb.
An important point after buying a device Henny Penny CMC/CMR-105 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Henny Penny CMC/CMR-105 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Henny Penny CMC/CMR-105 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Henny Penny CMC/CMR-105 you will learn all the available features of the product, as well as information on its operation. The information that you get Henny Penny CMC/CMR-105 will certainly help you make a decision on the purchase.
If you already are a holder of Henny Penny CMC/CMR-105, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Henny Penny CMC/CMR-105.
However, one of the most important roles played by the user manual is to help in solving problems with Henny Penny CMC/CMR-105. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Henny Penny CMC/CMR-105 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
