Instruction/ maintenance manual of the product BCF-24/65/110 Henny Penny
Go to page of 14
Model BCF-24/65/1 10, BCM-1 10 SECTION 2. MAINTENANCE 2-1. INTRODUCTION This section provides procedures for the checkout and replace ment of the various parts used within the blast chiller/freezer . Before replacing any parts, refer to the T roubleshooting Section.
Model BCF-24/65/1 10, BCM-1 10 2-5. CONTROL BOARD 1. Remove the electrical power to the unit. T o avoid electrical shock or pr operty damage, move the power switch to OFF and disconnect main circuit breaker , or unplug cord at wall receptacle.
Model BCF-24/65/1 10, BCM-1 10 2-6. BUZZER 1. Remove the electrical power to the unit. T o avoid electrical shock or pr operty damage, move the power switch to OFF and disconnect main circuit breaker , or unplug cord at wall receptacle. 2. Using a Phillips head screwdriver , remove the two screws securing the front panel, and lower the panel.
Model BCF-24/65/1 10, BCM-1 10 2-8. DOOR FRAME HEA TER 1. Remove the electrical power to the unit. T o avoid electrical shock or pr operty damage, move the power switch to OFF and disconnect main circuit breaker , or unplug cord at wall receptacle. 2.
Model BCF-24/65/1 10, BCM-1 10 2-10. AIR PROBE AND 1 . Remove the electrical power to the unit. EV APORA T OR PROBE T o avoid electrical shock or pr operty damage, move the power switch to OFF and disconnect main circuit breaker , or unplug cord at wall receptacle.
Model BCF-24/65/1 10, BCM-1 10 2-12. FUSE AND FUSE If the unit has no power , the fuse may be blown. T o access the HOLDER fuse: 1. Remove the electrical power to the unit. T o avoid electrical shock or pr operty damage, move the power switch to OFF and disconnect main circuit breaker , or unplug cord at wall receptacle.
Model BCF-24/65/1 10, BCM-1 10 2-13. CONDENSA TION 2. Bend out the clips securing the rodent cover on the back of EV APORA T OR (Continued) the unit, and pull the cover down. 3. Disconnect the wires to the evaporator . 4. Pull up on the bottom of the evaporator to disengage the evaporator from the bracket.
Model BCF-24/65/1 10, BCM-1 10 2-15. RUN CAP ACIT OR 1. Remove the electrical power to the unit. T o avoid electrical shock or pr operty damage, move the power switch to OFF and disconnect main circuit breaker , or unplug cord at wall receptacle. 2. Remove the two screws securing the front panel and pull down the panel.
Model BCF-24/65/1 10, BCM-1 10 2-17. PREVENTIVE MAINTENANCE As in all food equipment, the Henny Penny Blast Chiller/Freezer does require care and proper mainte- nance.
Model BCF-24/65/1 10, BCM-1 10 W iring Diagrams BCF/BCM-1 10 2-10 603.
Model BCF-24/65/1 10, BCM-1 10 Wiring Diagram BCF-24/65 Refrigeration Diagram BCF-24/65 603 2-1 1.
Model BCF-24/65/1 10, BCM-1 10 Refrigeration Diagram BCF/BCM-1 10-UL Refrigeration Diagram BCF/BCM-1 10-Int’l. 2-12 603.
Model BCF-24/65/1 10, BCM-1 10 Electrical/Refrigeration Diagram 603 2-13.
Model BCF-24/65/1 10, BCM-1 10 Wiring Information of PC Board 2-14 603 1 -3 POWER SUPPL Y 2 COMPULSORY EARTHING CONNECTION 4 -5 POWER SUPPL Y OUTPUT FOR ELECTRIC HEA TING ELEMENT FOR DE-ICING OF THE E.
An important point after buying a device Henny Penny BCF-24/65/110 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Henny Penny BCF-24/65/110 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Henny Penny BCF-24/65/110 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Henny Penny BCF-24/65/110 you will learn all the available features of the product, as well as information on its operation. The information that you get Henny Penny BCF-24/65/110 will certainly help you make a decision on the purchase.
If you already are a holder of Henny Penny BCF-24/65/110, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Henny Penny BCF-24/65/110.
However, one of the most important roles played by the user manual is to help in solving problems with Henny Penny BCF-24/65/110. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Henny Penny BCF-24/65/110 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
