Instruction/ maintenance manual of the product KHTF-600 Henkel
Go to page of 7
Henkel, Inc. P.O. Box 1322 Hammond, LA 70404 (985) 345-2171 www.keenovens.com.
Henkel, Inc. P.O. Box 1322 * Hammond, Louisiana * 70404 * (985) 345-2171 www.keenovens.com Model KHTF-600 Re-bake Flux Oven Installation Instructions & Repair Parts List One Year Limited Warranty Henkel, Inc. warrants its products against de fects in material and workmanship.
Recommended Spare Parts When it is critical to have co ntinuous operation of this unit; we suggest having the following spare parts on hand: 240 V –1 Set of Elements, 1 Contactor 480 V – 1 Set of .
• Use special care when moving heavily loaded units. • Do not store combustible material on or around the unit. • Do not operate this unit empty. • When using the unit at a distance where an ex tension cord becomes necessary, a 3-conductor grounding cord of adequate size must be used for safety, and to prevent loss of power and overheating.
3. Check output side of fuse block for proper vo ltage. If fuses are bad, inspect oven wiring and components for damage. Replace fuses. 4. Check input and output voltages on temperature controller for prope r voltage. If input voltage is not present, check wiring.
Elements Element Cover Control Box Changing t he Elem ents Thermowell Changing t he Controller CHANGING THE CONTROLLER 1. Disconnect from the power source and remove cover plate from control box. 2. Tag and remove leads from back of controller. 3. The controller is held in place by mounting bracket s on either side of controller.
KHTF- 600 ACCESSORIES LIST ** Please state model number and serial number and specify voltage and wattage when ordering repair parts, spare parts, or accessory parts. All necessary attaching hardware is supplied with each part ordered. (Item numbers re fer to pictorial drawings below for repair parts.
An important point after buying a device Henkel KHTF-600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Henkel KHTF-600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Henkel KHTF-600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Henkel KHTF-600 you will learn all the available features of the product, as well as information on its operation. The information that you get Henkel KHTF-600 will certainly help you make a decision on the purchase.
If you already are a holder of Henkel KHTF-600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Henkel KHTF-600.
However, one of the most important roles played by the user manual is to help in solving problems with Henkel KHTF-600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Henkel KHTF-600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
