Instruction/ maintenance manual of the product KHT-900 Henkel
Go to page of 7
Henkel, Inc. P.O. Box 1322 Hammond, LA 70404 (985) 345-2171 www.keenovens.com.
Henkel, Inc. P.O. Box 1322 * Hammond, Louisiana * 70404 * (985) 345-2171 www.keenovens.com Model KHT-900 Oven Installation Instructions & Repair Parts List One Year Limited Warranty Henkel, Inc. warrants its products against de fects in material and workmanship.
Recommended Spare Parts When it is critical to have co ntinuous operation of this unit; we suggest having the following spare parts on hand: Heating Element Assembly Contactor General Information The model KHT-900 is a high temperature oven designed f or rebaking electrodes.
• Do not store combustible material on or around the unit. • Do not operate this unit empty. • When using the unit at a distance where an ex tension cord becomes necessary, a 3-conductor grounding cord of adequate size must be used for safety, and to prevent loss of power and overheating.
oven an optimum temperature. The diagonal shelf design accommodates 50 lb. electrode containers eliminating the need to remove rods from the cont ainers. The diagonal shelf design compartments also allow air to circulate freely throughout the oven. Guide to Storage See the enclosed guide to storage.
Corrective Maintenance CHANGING HEATING ELEMENTS 1. Disconnect oven from power source. 2. Remove back cover and insulation. 3. Remove electrical leads from elements and inspect leads for damage. When removing or installing leads on elements, use a backup wrench.
KHT-900 ACCESSORIES LIST ** Please state model number and serial number and specify voltage and wattage when ordering repair parts, spare parts, or accessory parts. All necessary attaching hardware is supplied with each part ordered. (Item numbers re fer to pictorial drawings below for repair parts.
An important point after buying a device Henkel KHT-900 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Henkel KHT-900 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Henkel KHT-900 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Henkel KHT-900 you will learn all the available features of the product, as well as information on its operation. The information that you get Henkel KHT-900 will certainly help you make a decision on the purchase.
If you already are a holder of Henkel KHT-900, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Henkel KHT-900.
However, one of the most important roles played by the user manual is to help in solving problems with Henkel KHT-900. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Henkel KHT-900 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
