Instruction/ maintenance manual of the product K-NP Henkel
Go to page of 6
Henkel, Inc. P.O. Box 1322 Hammond, LA 70404 (985) 345-2171 www.keenovens.com - 1 -.
Henkel, Inc. P.O. Box 1322 * Hammond, Louisiana * 70404 * (985) 345-2171 www.keenovens.com Model K-NP Holding Ovens Installation Instructions & Repair Parts List One Year Limited Warranty Henkel, Inc. warrants its products against de fects in material and workmanship.
Recommended Spare Parts When it is critical to have co ntinuous operation of this unit: we suggest having the following spare parts on hand: Heating Element Assembly Thermostat Assembly General Information The model K-NP Keen oven is designed for storing filler material and 12 inch wire spools.
• Do not store combustible material on or around the unit. • Do not operate this unit empty. • When using the unit at a distance where an ex tension cord becomes necessary, a 3-conductor grounding cord of adequate size must be used for safety, and to prevent loss of power and overheating.
IF OVEN FAILS TO OPERATE – NO HEAT 1. Check power source. 2. Check power cord continuity. Replace cord assembly if faulty. 3. If pilot light glows, voltage is being supplied to heating elements.
THERMOSTAT CALIBRATION 1. Turn on unit. Set control dial at desired tem perature. 2. Allow control to cycle at least three times (3) a nd observe temperature at the middle of the fourth cycle. 3. If calibration is required, carefully remove dial knob.
An important point after buying a device Henkel K-NP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Henkel K-NP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Henkel K-NP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Henkel K-NP you will learn all the available features of the product, as well as information on its operation. The information that you get Henkel K-NP will certainly help you make a decision on the purchase.
If you already are a holder of Henkel K-NP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Henkel K-NP.
However, one of the most important roles played by the user manual is to help in solving problems with Henkel K-NP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Henkel K-NP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
