Instruction/ maintenance manual of the product 548 SX Hecht
Go to page of 14
Kontakt: bs-lagerverkauf@web.de T elefon: 02532-964535.
56 56 56 56 2. GENERAL SAFETY RULES W arning: When using petrol tools, basic safety precautions, including the f ollowing, should always be followed to reduce the risk of ser ious personal injur y and/or damage to the unit. Read all these instruction before operating this product and retain these instr uctions f or future ref erence.
58 58 58 58 4. TECHNICAL D A T A Model HECHT 548 SW Engine type D YM1P64F A Self-Propelled yes Engine Displacement 135cc Blade Width 460mm Rated Speed 2800/min Fuel T ank Capacity 1200ml Grass catcher capacity 60L Net W eight 35.
60 60 60 60 W ARNING: only with a stopped motor and standstill cutter. Change: a) Raise the rear cov er and remov e the grass catch bag (Fi g. 7 A). b) Push the mulching wedge into the deck. Lock the mulching wedge with the button into the opening on the deck.
62 62 62 62 1. Release the brake control handle to stop the engine and blade . 2. Disconnect and ground the spar k plug wire as instr ucted in the separate engine manual to prev ent accidental star ting while equipment is unattended. 7.5 Connection for auto move (for HECHT 548 SW) 1.
64 64 64 64 10.1 Engine air cleaner CAUTION: Do not allow dir t or dust to clog the air filter foam element. The engine air cleaner ele- ment must be serviced (cleaned) after 25 hours normal mowing. The foam element must be ser viced regularly if the mower is used in dr y dusty conditions.
66 66 66 66 12. TROUBLES SHOO TING PROBLEM PROB ABLE CAUSE CORRECTIVE ACTION Engine does not star t. Throttle chock not in the correct position for the prevailing conditions. Mov e throttle chock to correct position Fuel tank is empty . Fill tank with fuel: ref er to ENGINE OWNERS MANUAL.
68 68 68 68 OBSAH: INTRODUCTION .......................................................................................................................................................... 68 SA FETY INSTR UCTIONS .........................
70 70 70 70 ST ARTING THE ENGINE T urn the fuel valve switc h to the ON position A1. FOR ST ARTING A COLD ENGINE: Mov e the throttle control to the choke position.
72 72 72 72 • Carbon monoxide poisoning from engine e xhaust.Be sure there is adequate ventilation whene ver y ou operate the engine. • Burns from hot par ts.Let the engine and exhaust system cool bef ore touching. • Injur y from moving par ts.
74 74 74 74 the upper limit mark (bottom edge of the oil fill hole). Do not ov erfill. 5. Reinstall the oil filler cap/ dipstick. NO TE: This engine is delivered without oil, be sure to put oil in the engine before the starting. Use a clean, detergent and high quality oil SAE30 and API.
76 8. Fuel tank A. Fly wheel B. Brake system 76 76 76 and there is free play in the cab le. The cable should 10 15 mm from the centerline as shown when the cable is new .
78 78 78 78 T AKING CARE OF UNEXPECTED PROBLEMS ENGINE WILL NOT ST ART POSSIBLE CA USE CORRECTION 1. Checking fuel out of fuel refuel Bad fuel, engine stored without eating or draining gasoline, of refueled with bad gasoline. Drain the fuel tank and carburetor (fig.
79 79 79 79 15. EC-DECLARA TION OF CONFORMITY 1 . My Wer co sp ol. s r .o. Za ml ýne m 25 /1 5 62 1 47 0 0, Prah a 4 IČO: 61 4 61 6 61 declare on our own responsibility 2.
An important point after buying a device Hecht 548 SX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hecht 548 SX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hecht 548 SX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hecht 548 SX you will learn all the available features of the product, as well as information on its operation. The information that you get Hecht 548 SX will certainly help you make a decision on the purchase.
If you already are a holder of Hecht 548 SX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hecht 548 SX.
However, one of the most important roles played by the user manual is to help in solving problems with Hecht 548 SX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hecht 548 SX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center