Instruction/ maintenance manual of the product SL-5330 Heath Zenith
Go to page of 4
OPERA TION Model SL-5330 Motion Sensor Light Contr ol with Pr otective Lamp Shields © 2003 DESA Specialty Products™ 598-1131-01 * resets to Auto Mode at dawn. TEST Light Control Sensor Cover Plate Lamp Holders 6 Screws (3 sizes included) Gasket Features • Turns on lighting when motion is detected.
2 598-1131-01 INST ALLA TION For easy installation, select an existing light with a wall switch for replacement. W IRE THE L IGHT C ONTROL . ❒ Turn power off at the fuse or circuit breaker. ❒ Remove the existing light fixture. ❒ Install the mounting strap as shown using two screws that fit your junction box.
3 598-1131-01 Motion Motion TEST AND ADJUSTMENT ❒ Turn on the circuit breaker and light switch. NOTE: Sensor has a 1 1 / 2 minute calibration period before it will detect motion.
4 598-1131-01 TR OUBLESHOO TING GUIDE SYMPTOM Lights will not come on. Lights come on in daylight. Lights come on for no apparent rea- son. POSSIBLE CAUSE 1. Light switch is turned off. 2. Flood light is loose or burned out. 3. Fuse is blown or circuit breaker is turned off.
An important point after buying a device Heath Zenith SL-5330 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Heath Zenith SL-5330 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Heath Zenith SL-5330 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Heath Zenith SL-5330 you will learn all the available features of the product, as well as information on its operation. The information that you get Heath Zenith SL-5330 will certainly help you make a decision on the purchase.
If you already are a holder of Heath Zenith SL-5330, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Heath Zenith SL-5330.
However, one of the most important roles played by the user manual is to help in solving problems with Heath Zenith SL-5330. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Heath Zenith SL-5330 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
