Instruction/ maintenance manual of the product RC300 Hearth and Home Technologies
Go to page of 8
Hearth & Home T echnologies • RC300 Multifunction Remote Control • 2166-393 Rev . C • 9/10 1 Installation & Operating Instructions RC300 IntelliFire Plus™ Multifunction Remote Control .
Hearth & Home T echnologies • RC300 Multifunction Remote Control • 2166-393 Rev . C • 9/10 2 Figure 4. Mounting Remote Control Housing 5. Close the housing door . See Figure 4. AUX300 Module Installation • Insert the 4 hole harness from the AUX300 module into the 4 pin plug on the control module.
Hearth & Home T echnologies • RC300 Multifunction Remote Control • 2166-393 Rev . C • 9/10 3 Fan Installation • Insert the 3 prong plug from the fan into the receptacle located in the AUX300 module. See Figure 6. • Insert 3 prong plug from AUX300 module into REM/AUX receptacle of fi replace junction box.
Hearth & Home T echnologies • RC300 Multifunction Remote Control • 2166-393 Rev . C • 9/10 4 TO JUNCTION BOX (120V) I S FLAME SENSE IGNITER 3 PRONG 120V AC RC300 4.
Hearth & Home T echnologies • RC300 Multifunction Remote Control • 2166-393 Rev . C • 9/10 5 FIREPLACE ST A TUS THERMOST A T THERMOST A T DESIRED TEMP SETTING FLAME HEIGHT F AN SPEED ADJUST .
Hearth & Home T echnologies • RC300 Multifunction Remote Control • 2166-393 Rev . C • 9/10 6 About ON Mode • All functions can be accessed when the remote control is in the ON mode. • Only active functions will be displayed when the remote control is in the ON mode.
Hearth & Home T echnologies • RC300 Multifunction Remote Control • 2166-393 Rev . C • 9/10 7 Adjusting Thermostat • Press the MENU button to activate the menu.
Hearth & Home T echnologies • RC300 Multifunction Remote Control • 2166-393 Rev . C • 9/10 8 Please contact your Hearth & Home T echnologies dealer with any questions or concerns. For the location of your nearest Hearth & Home T echnologies dealer , please visit www .
An important point after buying a device Hearth and Home Technologies RC300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hearth and Home Technologies RC300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hearth and Home Technologies RC300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hearth and Home Technologies RC300 you will learn all the available features of the product, as well as information on its operation. The information that you get Hearth and Home Technologies RC300 will certainly help you make a decision on the purchase.
If you already are a holder of Hearth and Home Technologies RC300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hearth and Home Technologies RC300.
However, one of the most important roles played by the user manual is to help in solving problems with Hearth and Home Technologies RC300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hearth and Home Technologies RC300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
