Instruction/ maintenance manual of the product Montana-36 Hearth and Home Technologies
Go to page of 28
01/04 4039-150 Rev B 1 INST ALLA TION & OPERA TING INSTRUCTIONS MONT ANA-36 AND MONT ANA-42 OUTDOOR WOODBURNING FIREPLACE This fireplace must be inst alled outside. Significant cold air infiltration will result if it is inst alled inside a structure.
2 4039-150 Rev B 01/04 MONT ANA INST ALLA TION INSTRUCTIONS TABLE OF CONTENTS A. Listings and Code Approvals ........................................................................................................................................ 3 B. Description of the Fireplace System .
01/04 4039-150 Rev B 3 MONT ANA INST ALLA TION INSTRUCTIONS W ARNING! This fireplace and its components are designed to be inst alled and operated as a system.
4 4039-150 Rev B 01/04 MONT ANA INST ALLA TION INSTRUCTIONS C. FIREPLACE SYSTEM COMPONENTS 1. Fireplace Component s Fireplace Dimensions # g o l a t a C: n o i t p i r c s e D 6 3 - A N A T N O M2 4 -.
01/04 4039-150 Rev B 5 MONT ANA INST ALLA TION INSTRUCTIONS 2. Chimney Components The following pictures show only those chimney components which may be safely used with this fireplace.
6 4039-150 Rev B 01/04 MONT ANA INST ALLA TION INSTRUCTIONS # g o l a t a CA B 6 0 1 1 L S" 6" ¾ 4 2 1 1 1 L S" 2 1" ¾ 0 1 8 1 1 1 L S" 8 1" ¾ 6 1 6 3 1 1 L S" 6 .
01/04 4039-150 Rev B 7 MONT ANA INST ALLA TION INSTRUCTIONS LDS33 (3 x 3) LDS46 (4 x 6) Decorative Shroud ST1 175 Square T ermination Cap CT56 Chase T op CAK5A Chimney Air Kit TR1 1T Round.
8 4039-150 Rev B 01/04 MONT ANA INST ALLA TION INSTRUCTIONS Figure 3 - Inst allation Along a W all or an Exterior Chase Figure 4 - Corner Installation W ARNING! T o prevent contact with sagging or loose insulation, the fireplace must not be installed against vapor barriers or exposed insulation.
01/04 4039-150 Rev B 9 MONT ANA INST ALLA TION INSTRUCTIONS W ARNING! Do not apply combustible finishing materials over any part of the st ainless face of this fireplace or a structure fire may result. The fireplace front may only be covered with noncombustible materials such as ceramic tile, brick or stone.
10 4039-150 Rev B 01/04 MONT ANA INST ALLA TION INSTRUCTIONS Figure 7 - Chimney Offset/Return Example: Y our A dimension from Figure 7 is 14½. Using T able 1 the dimension closest to, but not less than 14½ is 14 5 / 8 using a 30° offset/return.
01/04 4039-150 Rev B 11 MONT ANA INST ALLA TION INSTRUCTIONS Figure 8 - Chimney Height S T N E N O P M O C Y E N M I H C F O T H G I E H r e z i l i b a t S y e n m i h C 1 1 L S4 3 / 4 " s r e c.
12 4039-150 Rev B 01/04 MONT ANA INST ALLA TION INSTRUCTIONS F . INST ALLA TION OF THE FIREPLACE W ARNING! Before st arting, do the following: 1. W ear gloves and safety glasses for protection. 2. Keep hand tools in good condition. Sharpen cutting edges and make sure tool handles are secure.
01/04 4039-150 Rev B 13 MONT ANA INST ALLA TION INSTRUCTIONS Figure 1 1 Installing the Firestop Sp acer CAUTION: Firestop sp acers must be used whenever the chimney penetrates a ceiling/floor area.
14 4039-150 Rev B 01/04 MONT ANA INST ALLA TION INSTRUCTIONS W ARNING! Maintain a minimum of 2 air clearance to all parts of the chimney system at all times! Failure to maintain this 2 air clearance will cause a structure fire. CAUTION: Inner flue and outer liner sections cannot be disas- sembled once locked together .
01/04 4039-150 Rev B 15 MONT ANA INST ALLA TION INSTRUCTIONS 9. Inst all the T ermination Cap If a roof flashing is to be used, install the roof flashing appropriate to the roof pitch and install a round termination cap following the instructions shipped with the cap.
16 4039-150 Rev B 01/04 MONT ANA INST ALLA TION INSTRUCTIONS 1 1. Inst all the Chimney Air Kit When installing the chimney air kit, follow the instructions provided with this accessory . Figure 17- Cooling Air Location Note: The cooling air kit must terminate at least six feet above ground level.
01/04 4039-150 Rev B 17 MONT ANA INST ALLA TION INSTRUCTIONS Note: Use only a noncombustible material to finish the face of the fireplace below the level of the front standof fs. A noncombustible material such as USG MICORE CV230 Mineral Fiber Board, or USG DUROCK Cement Board is recommended for this purpose.
18 4039-150 Rev B 01/04 MONT ANA INST ALLA TION INSTRUCTIONS Figure 21 - Factory Built Hearth Extension Figure 22 - Field Constructed Hearth Extension W ARNING! Hearth extensions are to be inst alled only as illustrated to prevent high temperatures from occurring on concealed combustible materials.
01/04 4039-150 Rev B 19 MONT ANA INST ALLA TION INSTRUCTIONS Figure 23 - Position the Hearth Extension 15. Position the Hearth Extension Position and secure the hearth extension over the protective metal strips that have been placed partially under the fireplace front.
20 4039-150 Rev B 01/04 MONT ANA INST ALLA TION INSTRUCTIONS W ARNING! Never install a single wall slip section or smoke-pipe in a chase structure. The higher temperature of this single wall pipe may radiate sufficient heat to combustible chase materials to cause a fire.
01/04 4039-150 Rev B 21 MONT ANA INST ALLA TION INSTRUCTIONS Note: Save and p ass this instruction manual to subsequent home owners. The information provided is intended to notify and warn them about making unsafe future modifications such as the addition of shelves or the use of unauthorized part s and rep airs.
22 4039-150 Rev B 01/04 MONT ANA INST ALLA TION INSTRUCTIONS Figure 24 Proper Operating Positions of Bi-Fold Doors CAUTION: When left closed while burning your fireplace, firescreens and glass doors will be HOT .
01/04 4039-150 Rev B 23 MONT ANA INST ALLA TION INSTRUCTIONS SEASONING: Seasoned firewood is nothing more than wood that is cut to size, split and air dried to a moisture content of around 20%. The time it takes to season wood varies from around nine months for soft woods to as long as eighteen months for hardwoods.
24 4039-150 Rev B 01/04 MONT ANA INST ALLA TION INSTRUCTIONS CAUTION: Never use gasoline, gasoline-type lantern fuel, kerosene, charcoal lighter fluid, or similar liq- uids to start or freshen up a fire in this fire- place. Keep all such liquids well away from the fireplace.
01/04 4039-150 Rev B 25 MONT ANA INST ALLA TION INSTRUCTIONS H. MAINTENANCE INSTRUCTIONS W ARNING! A chimney fire can permanently damage your chimney system. This damage can only be repaired by replacing the damaged component part s. Chimney fires are not cov- ered by the Limited W arranty and Buyer Protection Plan.
26 4039-150 Rev B 01/04 MONT ANA INST ALLA TION INSTRUCTIONS Homeowner s Notes.
01/04 4039-150 Rev B 27 MONT ANA INST ALLA TION INSTRUCTIONS INDEX A Air Clearance 14, 17 Ashes, Disposal of 25 Attic Insulation Shield 6, 14 B Building Codes 3, 19 C Chase T op 7, 19 Chimney Checking.
28 4039-150 Rev B 01/04 W ARRANTY FOR HEA T -N-GLO FIREPLACES The limited warranty will not become effective until you have mailed the completed warranty card to: Hearth & Home T echnologies Inc., A DIVISION OF HON Industries 20802 Kensington Blvd.
An important point after buying a device Hearth and Home Technologies Montana-36 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hearth and Home Technologies Montana-36 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hearth and Home Technologies Montana-36 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hearth and Home Technologies Montana-36 you will learn all the available features of the product, as well as information on its operation. The information that you get Hearth and Home Technologies Montana-36 will certainly help you make a decision on the purchase.
If you already are a holder of Hearth and Home Technologies Montana-36, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hearth and Home Technologies Montana-36.
However, one of the most important roles played by the user manual is to help in solving problems with Hearth and Home Technologies Montana-36. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hearth and Home Technologies Montana-36 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
