Instruction/ maintenance manual of the product 184E XR44 Hayter Mowers
Go to page of 28
(English V ersion) P AR T NUMBER: 1 1 1-1519 (A) ISSUE 28.01.08 Hovertrim OWNER'S HANDBOOK MODELS : 184E XR44 Hovertrim 185E XR16 Hovertrim Manufactured by Hayter Limited 111-1519 (A) 28/1/08 4:44 pm Page 1.
111-1519 (A) 28/1/08 4:44 pm Page 1.2.
MAIN 1.3 5 6 12 3 13 7 9 8 15 11 2 4 14 1 HAY-G00108-A 10 16 Main Features Specifications FEA TURES Code 184E 185E Model XR44 XR16 Engine Honda Honda Engine type GXV57 GXV57 Fuel type Unleaded petrol Unleaded petrol Fuel capacity 0.271 litres 0.271 litres Engine Oil type SAE 13/30 SAE 13/30 Oil sump capacity 0.
111-1519 (A) 28/1/08 4:44 pm Page 1.4.
1.3 Main Features / Specifications 1.5 Contents 1.6 Introduction 1.7 W arranty 1.8 - 1.1 1 Safety Precautions 1.8 - T raining 1.8 - 1.9 - Pr eparation 1.9 - 1.10 - Operation 1.10 - 1.1 1 - Maintenance and Storage 1.1 1 - Safety Symbols 1.1 1 - Decal Symbols 1.
1.6 INTRODUCTION Thank you for purchasing an Allen machine. The following pages are designed to help you gain safe and efficient service from your machine. IMPOR T ANT : This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety , operation, maintenance and specifications.
1.7 W ARRANTY LIMITED W ARRANTY Allen mower ’ s are manufactured by Hayter Limited. The manufacturer warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of one year from the date of purchase.
1.8 SAFETY PRECAUTIONS This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury . Carefully read the following and inform others. Y our machine is perfectly safe if used corr ectly . Failure to observe the following precautions may r esult in serious injury .
1.9 SAFETY - Always use fresh fuel. Stale fuel can block the carburettor and cause leakage. - Replace fuel tank and oil tank caps securely . A damaged cutter device or impeller or both must be replaced. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition.
1.10 Do not put hands or feet near or under rotating parts. Never pick up or carry the machine while the engine is running. Never touch the exhaust/exhaust guard or cooling fins when the engine is hot. Stop the engine and disconnect the spark plug lead: - Before clearing blockages.
1.11 SAFETY PRECAUTIONS If the fuel tank has to be drained, this should be done outdoors and when the engine is cool. W ear strong work gloves when removing and reassembling the cutting device. Always replace worn or faulty parts with genuine Allen parts.
Remove the machine from the packaging and check that the following items have been supplied correctly . If any items are missing contact, your local dealer . Main deck, lower and upper handlebars. 1. Handlebar bolt x 2 5. Spanner x 1* 9. Handwheel x 2* 2.
T o prevent engine damage the engine is shipped without oil or petr ol. The engine must be filled with the corr ect grade of oil and petrol befor e starting. Always use high quality detergent oil classified SAE 10W -30. Never use additives with recommended oil.
Check that the engine stop lever moves freely and returns to it’ s rest position when released. 1. Open the fuel tank vent by turning the vent knob at least 2 or 3 turns counterclockwise. 2. T urn the fuel valve lever to the ON position. 3. T o start a cold engine, move the choke lever to the CLOSED position.
1.15 OPERA TING 4. Hold the handlebar together with the engine stop lever , place your foot on the deck and tilt the mower towards you. This will take the load off the engine making it easier to start. Pull the starter grip lightly until you feel resistance, then pull briskly .
The cutting height of your mower has been set at the highest position (1). If you prefer a lower cut follow these instructions: a. T urn the petrol tap to the off position and where fitted the vent screw . b. Disconnect the spark plug lead. c. T ilt the mower to its side.
T o prevent accidents stop the engine disconnect the spark plug lead before attempting to carry out maintenance pr ocedures on the mower . 1. Spark Plug / Lead 2. Exhaust Guard 3. Exhaust 4. Oil filler Cap/ Dipstick 5. Finger Guard 6. Start Grip 7. Fuel Cap V ent Knob 8.
1.18 MOWER MAINTENANCE T o service the air cleaner remove the air cleaner cover (1) by releasing two top catches (2) and tilting away from body until lower tabs release. Remove cartridge (3) and clean by tapping gently on a flat surface. If very dirty or damaged replace.
Remove all grass and debris from the engine including the exhaust/exhaust guard, the air ways in the top cowl and the surround- ing deck areas on a daily basis after use. Never spray the engine with water during cleaning. W ater can contaminate the fuel.
Storage Change the engine oil after the first 5 hours of operation and thereafter according to the ‘Maintenance Schedule’:- 1. Drain fuel by running the engine until the fuel tank is empty . 2. Remove the spark plug lead. 3. Allow the engine to cool.
EC DECLARATION OF CONFORMITY Ma nufac t ure r: HAYT ER LI MITED , Address: Spell brook, B ish op’s Stort ford, He rts. C M2 3 4BU. ENGLAND declare that the trimmer : Model name: Mod el No : Cutt ing.
1.22 TROUBLE SHOOTING PROBLEM POSSIBLE F AUL T REMEDY Engine will not turn over Engine stop lever released. Operate engine stop lever . Incorrect oil level. Check oil level. Obstruction under deck. Remove obstruction. Engine smokes Excess oil level. Check oil level.
PROBLEM POSSIBLE F AUL T REMEDY Engine vibrates excessively Mounting bolts loose. T ighten bolts Cutter disc bolt loose. Tighten bolt Bent crankshaft. Consult your dealer Damaged impeller or cutter di.
1.24 Item No. Description Part No. Q ty Item Note 1 ALLEN XR44 DECAL 111-1516 1 2 ALLEN XR16 DECAL ONLY 111-1825 1 3 WASHER 1/4*7/8*.08" THK 09263 2 4 NUT M6 NYLOC 'T' TYPE 09438 3 5 CA.
1.25 1 2 4 6 9 10 11 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 38 40 41 12 4 7 27 39 37 3 36 36 37 8 MAINFRAME PA R T S LIST 111-1519 (A) 28/1/08 4:44 pm Page 1.
1.26 NOTES 111-1519 (A) 28/1/08 4:44 pm Page 1.26.
1.27 Serial No: Engine T ype:- GXV57 Engine:- Honda Engine T ype:- GXV57 Engine:- Honda Date of Sale:- Y our Local Dealer:- CUST OMER INFORMA TION 111-1519 (A) 28/1/08 4:44 pm Page 1.
Manufactured by Hayter Limited Hayter Limited Spellbrook, Bishop’ s Stortford, Herts, CM23 4BU, England. T el: +44 (0) 1279 723444 Fax: +44 (0) 1279 600338 e-mail: sales@hayter .co.uk www .hayter .co.uk YOUR HA YTER DEALER IS: 111-1519 (A) 28/1/08 4:44 pm Page 1.
An important point after buying a device Hayter Mowers 184E XR44 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hayter Mowers 184E XR44 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hayter Mowers 184E XR44 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hayter Mowers 184E XR44 you will learn all the available features of the product, as well as information on its operation. The information that you get Hayter Mowers 184E XR44 will certainly help you make a decision on the purchase.
If you already are a holder of Hayter Mowers 184E XR44, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hayter Mowers 184E XR44.
However, one of the most important roles played by the user manual is to help in solving problems with Hayter Mowers 184E XR44. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hayter Mowers 184E XR44 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
