Instruction/ maintenance manual of the product Double 3 533A Hayter
Go to page of 33
OWNER’S HANDBOOK (English V ersion) FROM SERIAL NO: 533A001001 HANDBOOK: 533018 (Rev .0.) Issue : Sept 2002 Double 3 CODE 533A.
MODEL CODE 533A Engine Briggs & Stratton IC Engine T ype 12G 802 2610 B1 Engine / Cutterblade Speed 3000 rpm Fuel T ype Unleaded Petrol Fuel Capacity 1.5 litres Oil T ype SAE 30 engine oil Oil Sump Capacity 0.6 litres Spark Plug 802592E Spark Plug Gap 0.
1.17 Maintenance Schedule 1.18 - 1.24 Mower Maintenance 1.18 - Engine 1.18 - Thr ottle Cable Adjustment 1.18 - Carbur ettor Adjustments 1.19 - Oil Service 1.19 - Air Cleaner Service 1.20 - Spark Plug Service 1.20 - Keeping Engine Clean 1.20 - Grassbag 1.
Thank you for purchasing a Hayter mower . The following pages are designed to help you gain safe and efficient service from your mower . IMPOR T ANT : This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety , operation, maintenance and specifications.
LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase.
SAFETY PRECAUTIONS This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury . Carefully r ead the following and inform others. Y our mower is perfectly safe if used correctly . Failur e to observe the following precautions may r esult in serious injury .
SAFETY PRECAUTIONS - Always use fresh fuel. Stale fuel can block the carburettor and cause leakage. - Replace fuel tank and oil tank caps securely . A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition.
SAFETY PRECAUTIONS Do not tilt the mower when starting the engine. Do not put hands or feet near or under rotating parts. Never pick up or carry the mower while the engine is running. Never lift/open the rear deflector/door while the engine is running.
Allow the engine to cool before storing in any enclosure. T o reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease. Check the rear deflector and grassbag frequently for wear or deterioration.
Remove the mower from the packaging and check that the following items have been supplied correctly . If any items are missing contact, your local Hayter dealer . 1. Engine Handbook. 4. Mulcher Plug Note.(Inside Chute) 2. W arranty Reg. Card. 5. Side Discharge Chute 3.
T o prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol befor e starting the engine. Always use high quality detergent oil classified SAE 30 Oil. Never use additives with this oil.
Operate all control levers several times and ensure that the cables move freely . Check that the engine stop and ground drive clutch levers return freely to their rest position when released. Move the throttle control lever to the ‘ Fast ’ position.
Hold the handlebar and operate the ground drive clutch lever to power the mower in a forward direction. When the ground drive clutch lever is disengaged the mower may be pushed. This feature is useful when mowing in confined areas. The mower has a three speed rear wheel transmission system.
OPERA TING THE MOWER Move the height of cut lever sideways to disengage it from the locking notch, then push forwards to raise or pull backwards to lower the height of cut. Release the lever in the required position and ensure that it locks firmly into one of the seven notch settings.
OPERA TING Remove the rear discharge chute by removing nuts and washers. Slide the assembly from under the the shoulder bolt (A). Slide the new side dicharge chute assembly under the shoulder bolt (A). Then fasten the front and the back of the assembly with the fas- teners.
There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. Rake the grass thoroughly . Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary .
Keep mowing regularly and watering as necessary . Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture. Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow .
Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolonged periods under dusty , dry conditions, or when airborne debris is present or after extensive operation cutting tall, dry grass.
T o prevent accidents stop the engine disconnect the spark plug lead before attempting to carry out maintenance pr ocedures on the mower . 1. Engine Cowl 2. Carburettor 3. Spark Plug / Lead 4. Exhaust Guard 5. Exhaust 6. Oil filler Cap/ Dipstick 7. Start Grip 8.
Double 3 Check the oil level daily before starting the engine and ensure that the correct oil level is maintained. Refer to-‘Before Starting the Mower ’ for oil checking and filling instructions. Change the engine oil after the first 5 hours of operation and thereafter according to the ‘Maintenance Schedule’:- 1.
Use only Briggs & Stratton spark tester (1) to check for a spark as shown in the diagram. Replace the spark plug every 100 hours or every season, whichever occurs first. A spark plug wrench is available from any authorised Briggs & Stratton service dealer .
Remove grass debris from the top and underside of the deck housing immediately after use. T o prevent accidents fertilisers and top dr essings are particularly corrosive. Thor oughly clean the mower deck immediately after use on treated grass and stor e well away from corrosive materials.
Lubricate the wheels, pivot points and linkages with engine oil every 25 operating hours. Apply a good quality medium grease to the inner control cables at the point of entry and exit from their outer casing. Drain the fuel by running the engine until the fuel tank is empty and the engine stops.
Assemble the cutterblade (1) with the turned up edges facing towards the engine. Secure the cutterblade using the belleville washers (2) washer (3) and new fixing bolt (4) and tighten to a torque of 47.5Nm. T o prevent accidents never reuse the fixing bolt.
Double 3 Storage T o store the handlebar unscrew the 2 small securing knobs sufficient- ly to allow it to pivot forwards to rest against the mower . T ake care to ensure that the control cables do not become snagged at the pivot point and depress the engine stop lever to prevent it being damaged through contact with the engine spark plug.
TROUBLE SHOOTING PROBLEM POSSIBLE F AUL T REMEDY Engine will not turn over Incorrect oil level. Check oil level. Obstruction under deck. Remove obstruction. Engine smokes Excess oil level. Check oil level. Air cleaner cartridge oil Service air cleaner .
PROBLEM POSSIBLE F AUL T REMEDY Engine vibrates excessively Mounting bolts loose. T ighten bolts Cutterblade bolt loose. T ighten bolt Cutterblade out of balance.
DECLARA TION OF CONFORMITY 1.27 VIBRA TION INFORMA TION Lawnmower vibration information. RMS acceleration measured in 3 - axes at operators contact position on the handlebars.
NO. DESCRIPTION P ART NO. QTY ITEM NOTE 1 Engine 533017 1 2 Screw MU710264 2 3 Speed Control 533013 1 4 Cover , Rear MU671547 1 5 Screw 70-1 1-012 1 6 Screw MU710180 2 7 Adapter , Blade MU71285 1 8 St.
NO. DESCRIPTION P AR T NO. QTY ITEM NOTE 48 Hub Cap MU43615 2 49 Support, Wheel MU71370E701 1 50 Nut 09203 1 51 Nut MU15x88 2 52 Rear Discharge Chute MU671289 1 53 Deflector , Rear MU671296 1 54 Rod M.
1.30 NO. DESCRIPTION P ART NO. QTY ITEM NOTE 93 W asher 09267 2 94 Rivet MU710259 2 95 Locknut 09447 1 96 Pulley , T ransmission MU671288 1 97 Chute - Floor MU672230 1 98 Pin, Drive MU43629 2 99 T ran.
1.31 62 94 BRIGGS & STRATTON 3 Double I/C { 101 12 26 37 34 68 36 29 21 46 13 97 110 42 18 28 2 33 16 100 91 67 55 3 69 114 72 45 96 115 4 99 64 51 48 25 88 79 73 76 48 38 7 81 40 27 9 28 33 32 92.
1.32 Mower Serial No:................................................................................. Engine Model:.................................. T ype:.
An important point after buying a device Hayter Double 3 533A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hayter Double 3 533A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hayter Double 3 533A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hayter Double 3 533A you will learn all the available features of the product, as well as information on its operation. The information that you get Hayter Double 3 533A will certainly help you make a decision on the purchase.
If you already are a holder of Hayter Double 3 533A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hayter Double 3 533A.
However, one of the most important roles played by the user manual is to help in solving problems with Hayter Double 3 533A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hayter Double 3 533A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
