Instruction/ maintenance manual of the product C-VS-1200-EXPD-1 Havis-Shields
Go to page of 4
4 INSTALL INSTRUCTIONS C-VS-1200-EXPD-1 VEHICLE SPECIFIC CONSOLE 2007-2008 FORD EXPEDITION (w/ Console shifter) TOOLS REQUIRED: Ratcheting wrench Sockets Set Panel pulling tool Screwdriver set T-20 to.
C-VS-1200-EXPD-1_I NST_9-07 2 View of vehicle w/ full console & console shifter Remove accessory pocket liner as shown above Remove trim panel from console.
C-VS-1200-EXPD-1_I NST_9-07 3 Parts removed from OEM console Completely remove the contain er of the accessory pocket Remove hex head screws holding lower sides accessory pocket Remove hex head screws.
C-VS-1200-EXPD-1_I NST_9-07 4 Replace the trim panel around gear shifter Replace trim panel around factory cup holder Replace the trim panel previously removed earlier Install #10 x ½” machine screws and keps nuts as shown above View of console installed View of specific application including C-TCB-24, C- ARM-2, C-3090-7, control heads, etc.
An important point after buying a device Havis-Shields C-VS-1200-EXPD-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Havis-Shields C-VS-1200-EXPD-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Havis-Shields C-VS-1200-EXPD-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Havis-Shields C-VS-1200-EXPD-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Havis-Shields C-VS-1200-EXPD-1 will certainly help you make a decision on the purchase.
If you already are a holder of Havis-Shields C-VS-1200-EXPD-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Havis-Shields C-VS-1200-EXPD-1.
However, one of the most important roles played by the user manual is to help in solving problems with Havis-Shields C-VS-1200-EXPD-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Havis-Shields C-VS-1200-EXPD-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
