Instruction/ maintenance manual of the product C-MCB-CV Havis-Shields
Go to page of 2
C-MCB-CV-INST-6-07 INSTALL INSTRUCTIONS C-MCB-CV DUAL IN-DASH MICROPHONE CLIP BRACKET 1996-2007 FORD CROWN VICTORIA TOOLS REQUIRED: Ratcheting wrench Sockets - 7/16”, #10, #8 Screwdriver set T-20 torx bit Always ! Read all instructions befo re installing any Havis-Shields Equipment Corp products.
C-MCB-CV-INST-6-07 2 Slide bracket between trim around radio and the trim panel previously removed Replace screws previously removed Re-attach trim panel Install microphone clip brackets using #8 x ½.
An important point after buying a device Havis-Shields C-MCB-CV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Havis-Shields C-MCB-CV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Havis-Shields C-MCB-CV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Havis-Shields C-MCB-CV you will learn all the available features of the product, as well as information on its operation. The information that you get Havis-Shields C-MCB-CV will certainly help you make a decision on the purchase.
If you already are a holder of Havis-Shields C-MCB-CV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Havis-Shields C-MCB-CV.
However, one of the most important roles played by the user manual is to help in solving problems with Havis-Shields C-MCB-CV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Havis-Shields C-MCB-CV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
