Instruction/ maintenance manual of the product FST-1-MN Hatco
Go to page of 12
MACHO NACHO ™ Chip W armer FDW -1-MN & FST -1-MN Series Installation & Operating Manual I&W #07.05.087.00 This manual contains important safety information concerning the maintenance, use and operation of this product. Failure to follow the instructions contained in this manual may result in serious injury .
Nacho Chip W armer . Safety instructions that appear in this manual after a warning symbol and the words W ARNING or CAUTION printed in bold face are very important. W ARNING means there is the possibility of serious injury or death to yourself or others.
CAUTIONS Locate the unit at the proper counter height, in an area that is convenient for use. The location should be level to prevent the unit or its contents from accidentally falling, and str ong enough to support the weight of the unit and food displayed.
MODEL DESCRIPTION 2 ALL MODELS The Hatco Macho Nacho ™ Chip W armer is a high-visibility merchandiser for warming and displaying nacho chips. The unique air flow forces warm air to the bottom and is distributed into the cabinet through holes in the floor panels directing maximum heat to the chips being served.
SPECIFICA TIONS 3 Form No. MNM-0702 PLUG CONFIGURA TIONS Units are supplied from the factory with an electrical cord and plug installed. Plugs are supplied according to the applications as shown in Figure 3. W ARNING Plug unit into a properly gr ounded electrical outlet of the correct voltage, size and plug configuration.
INST ALLA TION 4 Form No. MNM-0702 Chip Deflector Floor Panels Decal-Install on upper stainless steel panel. Install chip deflector in slot s located behind upper door panel. Figure 5. Set-Up (FDW-1-MN shown) SET -UP The Macho Nacho ™ unit comes pre-assembled and ready for set-up.
5 Form No. MNM-0702 OPERA TION ALL MODELS CAUTION Some exterior surfaces on the unit will get hot. Use caution when touching these areas to avoid injury . 1. Plug warmer into a properly grounded electrical outlet of the correct voltage, size and plug configuration.
MAINTENANCE 6 Form No. MNM-0702 GENERAL Hatco Macho Nacho ™ Chip W armers are designed for maximum durability and performance, with minimum maintenance.
7 Form No. MNM-0702 HA TCO LIMITED W ARRANTY 1. PRODUCT W ARRANTY Hatco warrants the products that it manufactures (the “Products”) to be free from defects in materials and workmanship, under norm.
8 Form No. MNM-0702 NOTES.
9 Form No. MNM-0702 NOTES.
HA TCO CORPORA TION P .O. Box 340500, Milwaukee, WI 53234-0500 U.S.A. (800) 558-0607 (414) 671-6350 Parts & Service Fax (800) 690-2966 Int’l. Fax (414) 671-3976 www .hatcocorp.com HA TCO AUTHORIZED P ARTS DISTRIBUTORS Part No. 07.04.287.00 Form No.
An important point after buying a device Hatco FST-1-MN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hatco FST-1-MN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hatco FST-1-MN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hatco FST-1-MN you will learn all the available features of the product, as well as information on its operation. The information that you get Hatco FST-1-MN will certainly help you make a decision on the purchase.
If you already are a holder of Hatco FST-1-MN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hatco FST-1-MN.
However, one of the most important roles played by the user manual is to help in solving problems with Hatco FST-1-MN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hatco FST-1-MN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
