Instruction/ maintenance manual of the product HC 2.2/100 Hasselblad
Go to page of 2
LENSES www .hasselblad.com 1/2 Document ID: 2004-09-24 GENERAL LENS DA TA: Focal length 100.0 mm Aper ture range 2.2 - 32 Angle of view diag/hor/ver t 38°/31°/24° Length/diameter 80.5 mm/87.5 mm Weight 780 g Filter diameter 77 mm HASSELBLAD HC 2.2/100 MTF Modulation T ransfer as a func- tion of image height at innite focus setting.
LENSES www .hasselblad.com 2/2 Document ID: 2004-09-24 HASSELBLAD HC 2.2/100 RELA TIVE ILLUMINA TION Innity setting DISTORTION Innity setting.
An important point after buying a device Hasselblad HC 2.2/100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Hasselblad HC 2.2/100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Hasselblad HC 2.2/100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Hasselblad HC 2.2/100 you will learn all the available features of the product, as well as information on its operation. The information that you get Hasselblad HC 2.2/100 will certainly help you make a decision on the purchase.
If you already are a holder of Hasselblad HC 2.2/100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Hasselblad HC 2.2/100.
However, one of the most important roles played by the user manual is to help in solving problems with Hasselblad HC 2.2/100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Hasselblad HC 2.2/100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
