Instruction/ maintenance manual of the product Signature Series Harman-Kardon
Go to page of 12
2.1 Multichannel Amplifier Owner’ s Manual Sig 2.1 om (d) 9/17/98 10:27 AM Page 10.
Owner’ s Manual Signature 2.1 Multichannel Amplifier T able of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Signature 2.1 Congratulations! As the owner of a Harman Kardon Signature Series 2.1 Power Amplifier , you have at your command a unique product. The 2.
Safety Information 2 Signature 2.1 Important Safety Information V erify Line V oltage Before Use Y our new Signature Series 2.1 amplifier has been factory- configured for use with 120-volt AC line current.
Unpacking and Installation 3 Signature 2.1 Cleaning When the unit gets dirty , wipe it with a clean, soft and dry cloth. If necessary , first wipe the surface with a soft cloth slightly dampened with mild soapy water , followed by a fresh cloth with clean water .
Front and Rear Panels 4 Signature 2.1 ¡ Speaker Outputs: Connections from these terminals should be made to the appropriate speakers in your system. ™ A udio Inputs: Connect the outputs of the Signature 2.0, or other surround processor , preamplifier or decoder to these jacks.
Installation and Connections 5 Signature 2.1 Note: When making any connections between source components, processors or preamplifiers and the 2.1, or when making any connections to speakers, be certain that both the input device and the 2.1 are turned off.
Installation and Connections 6 Signature 2.1 Cable with a gauge of 16 may be used for short runs of less than ten feet. W e do not recommend the use of cables with an A WG equivalent of 18 or higher due to the power loss and degradation in performance that will occur .
Operation 7 Signature 2.1 The Signature 2.1 may be operated in either a manual or automatic mode. If the unit is being used in standalone operation you should follow the instructions below for Manual Operation.
Service Information / T roubleshooting 8 Signature 2.1 If your installation has followed the procedures in this manual, you should enjoy many years of trouble-free operation and high-quality listening enjoyment. The 2.1 does not contain any user -serviceable parts.
Power Output: High-Current Capability: Frequency Response: Power Bandwidth: THD/IMD: Crosstalk Negative Feedback: Input Impedance: Input Sensitivity: Remote T rigger V oltage: Remote T rigger Impedance: Dimensions (H x W x D): W eight: Power Requirements: 5 x 100 watts @ 8 ohms 20Hz – 20kHz, <0.
Printed in the United States Part #1 1 1 1- HKSIG21 HA160-0003-A Sig 2.1 om (d) 9/17/98 10:27 AM Page 9.
An important point after buying a device Harman-Kardon Signature Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harman-Kardon Signature Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harman-Kardon Signature Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harman-Kardon Signature Series you will learn all the available features of the product, as well as information on its operation. The information that you get Harman-Kardon Signature Series will certainly help you make a decision on the purchase.
If you already are a holder of Harman-Kardon Signature Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harman-Kardon Signature Series.
However, one of the most important roles played by the user manual is to help in solving problems with Harman-Kardon Signature Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harman-Kardon Signature Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
