Instruction/ maintenance manual of the product GREYHOUND 56072 Harbor Freight Tools
Go to page of 20
20 T ON LOG SPLITTER 56072 SET UP , OPERA TING, AND SER VICING INSTRUCTIONS W ARNING! IMPORT ANT INFORMA TION The Hitch Coupler MUST be properly sec ure d to the hitch ball of th e towin g veh icl e. After assembly and attachment, pull up and down on the Hitch Coupler to make sure the hitc h ball is tting snugl y in the Hitch Coup ler .
SKU 56072 For technical questions, please call 1-800-444-3353. Page 2 CONTENTS IMPORT ANT SAFETY INFORMA TION ............................ 3 BASIC SPECIFICA TIONS ............. 7 UNP ACKING .................................. 7 SET UP INSTRUCTIONS ....
SKU 56072 For technical questions, please call 1-800-444-3353. Page 3 SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 4 Wear ANSI-approved safety goggles, 5. heavy-duty work gloves, and dust mask/respirator during set up. Use only lubricants and fuel recom- 6. mended in the engine manual or in the Specications chart of this man - ual.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 5 SERIOUS PERSONAL INJURY , or DEA TH. Never place hands or feet between 1 1. the log and splitter wedge, or between the log and the ram during the forward or reverse stroke. Never place your hands or body near 12.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 6 Before use, check for misalignment 29. or binding of moving parts, breakage of parts, and any other condition that may affect the equipment’ s operation. If damaged, have the equipment serviced before using.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 7 BASIC SPECIFICA TIONS Hydraulic Jack Force 20 T ons Hydraulic Fluid Capacity 8 Gallons Hydraulic Fluid Anti-abrasion ISO viscosity grade #46 Hydraulic Fluid. Change every 100 hours of use.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 8 be cleaned even if they are new or appear clean. Allow all pieces to dry completely . Place fresh, clean bearing grease in 3. the packer (not included). With the grease-lled bearing packer 4.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 9 Raise the Engine and Oil T ank 1. Assembly about 9 inches onto a secure platform. Connect the Wheels to the axles using the supplied hardware (parts 53 - 55) as previously stated. (It may be necessary to reset the wheel bearings after the Log Splitter has been towed.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 10 Figure D 8. The Spindles are used to assemble and connect the Log Lift (01) to the main unit - See Figure D.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 1 1 the air inlet hole by tightening the Hydraulic Oil Cap. OPERA TING INSTRUCTIONS Read the ENTIRE IMPORT ANT SAFETY INFORMA TION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 12 Figure G 6. Push the LEFT control lever forward to engage the hydraulic ram and split the log.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 13 Figure H Clevis Pin (74) 3. Raise the Log Lift and insert the Clevis Pin (74) in the upper hole and secure with R-pin (41) - See Figure H. Figure I Push Pin (42) 4. Move the front leg up and secure it at the second Pin hole.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 14 SER VICING TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL ST ARTING: T urn the Power Switch of the equipment to its “OFF” position, wait for the engine to cool, and disconnect the spark plug wire(s) before performing any inspection, maintenance, or cleaning procedures.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 15 Changing the Hydraulic Fluid Place a container underneath the 1. hydraulic uid tank to catch the uid, and unscrew the cap on the bottom of the tank. Unscrew the Hydraulic Oil Cap to 2.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 16 P ARTS LIST Part Description Qty 1 Log Lift 1 2 Hair Pin Clip 8 3 Spindle #1 M32 1 4 Hex Bolt M12x70 1 5 Nut M12 1 6 Hydraulic Cylinder 1 7 Spindle #2 M10.6 1 8 Fitting #1 3 9 Hex Bolt M10x70 5 10 Directional V alve 1 11 Connector 2 12 Connector 5 13 Return Hose 27.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 17 ASSEMBL Y DIAGRAM.
Hydraulic Ram Seals Parts List & Diagram Part Description Qty 01-6 O-ring Seal 1 18*5.3 4 01-7 O-ring Seal 38.5*3.55 1 01-9 J T ype Rubber Seal 50*70*10 1 01-10 Y T ype Seal 50*70*10 1 01-1 1 O-ring Seal 50*3.55 1 01-14 Nylon W asher 127*1 18*2 3 Part Description Qty 31-5 Nylon Cap 63 54.
SKU 56072 For technical questions, please call 1-800-444-3353. Page 19 PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS LIST AND ASSEMBL Y DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y .
SKU 56072 For technical questions, please call 1-800-444-3353. Page 20 LIMITED 1 YEAR / 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and.
An important point after buying a device Harbor Freight Tools GREYHOUND 56072 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools GREYHOUND 56072 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools GREYHOUND 56072 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools GREYHOUND 56072 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools GREYHOUND 56072 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools GREYHOUND 56072, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools GREYHOUND 56072.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools GREYHOUND 56072. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools GREYHOUND 56072 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
