Instruction/ maintenance manual of the product CEN - TECH 66550 Harbor Freight Tools
Go to page of 12
INSPECTION CAMERA 2.4” LCD 66550 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2008 by Harbor Freight T ools ® .
SKU 66550 For technical questions, please call 1-800-444-3353. Page 2 SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures.
SKU 66550 For technical questions, please call 1-800-444-3353. Page 3 ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. Do not expose power tools to rain c. or wet conditions. W ater entering a power tool will increase the risk of electric shock.
SKU 66550 For technical questions, please call 1-800-444-3353. Page 4 Battery tool use and care 5. Recharge only with the charger a. specied by the manufacturer . A charger that is suitable for one type of battery pack may create a risk of re when used with another battery pack.
SKU 66550 For technical questions, please call 1-800-444-3353. Page 5 cause cancer , and birth defects or other reproductive harm. W ash hands after handling. (California Health & Safety Code § 25249.5, et seq. ) The warnings, precautions, and in- 12.
SKU 66550 For technical questions, please call 1-800-444-3353. Page 6 SPECIFICA TIONS CAMERA T otal Pixels 704x576 (P AL); 712x486 (NTSC) Modulation T ype FM Bandwidth 18MHz Power Supply 4 AA batteries MONITOR LCD Screen T ype 2.
SKU 66550 For technical questions, please call 1-800-444-3353. Page 7 Slide knurled knob on Control b. Handle up to threaded section on Camera cable and nger tighten to secure Camera cable in place.
SKU 66550 For technical questions, please call 1-800-444-3353. Page 8 power light on top of Control Handle will be lit. Use this dial to adjust the brightness of LEDs near Camera. Slide ON/OFF switch on right side of 3. Monitor (3) to “ON” position.
SKU 66550 For technical questions, please call 1-800-444-3353. Page 9 MAINTENANCE AND SER VICING Procedures not specically explained in this manual must be performed only by a qualied technician.
SKU 66550 For technical questions, please call 1-800-444-3353. Page 10 T roubleshooting Problem Possible Causes Likely Solutions T ool will not start. Monitor not charged. 1. Batteries need changing. 2. Charge Monitor . 1. Replace batteries in Control Handle.
SKU 66550 For technical questions, please call 1-800-444-3353. Page 1 1 P ARTS LIST Part Description Qty . 1 Control Handle 1 2 Mini Camera with Cable 1 3 Monitor 1 4 Hook 1 5 Magnet 1 6 Mirror 1 7 Ad.
SKU 66550 For technical questions, please call 1-800-444-3353. Page 12 LIMITED 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durabili.
An important point after buying a device Harbor Freight Tools CEN - TECH 66550 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools CEN - TECH 66550 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools CEN - TECH 66550 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools CEN - TECH 66550 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools CEN - TECH 66550 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools CEN - TECH 66550, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools CEN - TECH 66550.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools CEN - TECH 66550. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools CEN - TECH 66550 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
