Instruction/ maintenance manual of the product 97028 Harbor Freight Tools
Go to page of 13
BENCHT OP PLANISHING HAMMER Model 97028 ASSEMBL Y AND OPERA TING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally . Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed exclusively by Harbor Freight T ools ® .
Page 2 SKU 97028 For technical questions, please call 1-800-444-3353. SA VE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures.
Page 3 SKU 97028 For technical questions, please call 1-800-444-3353. GENERAL SAFETY RULES W ARNING! Read all instructions Failure to follow all instructions listed below may result in serious injury . SA VE THESE INSTRUCTIONS Work area safety 1. Keep work area clean and well lit.
Page 4 SKU 97028 For technical questions, please call 1-800-444-3353. Maintain tools. Check for misalignment or binding of moving parts, breakage e. of parts, damaged or cracked hoses, bad connections and any other condition that may affect the tool’ s operation.
Page 5 SKU 97028 For technical questions, please call 1-800-444-3353. SPECIFIC SAFETY RULES W ARNING! T o prevent serious injury and/or property damage: Wear ANSI-approved safety goggles and heavy-duty work gloves during use. 1. Do not exceed max air pressure of 100 PSI.
Page 6 SKU 97028 For technical questions, please call 1-800-444-3353. understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator .
Page 7 SKU 97028 For technical questions, please call 1-800-444-3353. ASSEMBL Y Mount the Frame (24) to workbench, and make sure it is fastened securely to 1. prevent loosening during use. The Frame can be lled with sand if you wish to help minimize sound and 2.
Page 8 SKU 97028 For technical questions, please call 1-800-444-3353. Read the ENTIRE IMPORT ANT SAFETY INFORMA TION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Page 9 SKU 97028 For technical questions, please call 1-800-444-3353. T urn on the Air Compressor (not included) and set it to 90 PSI. Do not exceed 1. maximum air pressure of 100 PSI. Before planishing, test the operation by pressing down on the Foot Pedal (26).
Page 10 SKU 97028 For technical questions, please call 1-800-444-3353. T roubleshooting Problem Possible Causes Probable Solutions Mini Planishing Hammer will not operate when Foot Pedal is depressed. No air pressure in air line. Regulator valve is closed.
Page 1 1 SKU 97028 For technical questions, please call 1-800-444-3353. P ARTS LIST Part Description Q’ty 1 Body 1 2 Rubber Gasket 1 3 O-Ring 2 4 Regulator 1 5 Control Pin 1 6 O-Ring 1 7 Ball 1 8 Sp.
Page 12 SKU 97028 For technical questions, please call 1-800-444-3353. ASSEMBL Y DIAGRAM.
Page 13 SKU 97028 For technical questions, please call 1-800-444-3353. LIMITED 1 YEAR W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durabilit.
An important point after buying a device Harbor Freight Tools 97028 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 97028 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 97028 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 97028 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 97028 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 97028, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 97028.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 97028. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 97028 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
