Instruction/ maintenance manual of the product 96755 Harbor Freight Tools
Go to page of 8
ST APLE GUN 3-W A Y T ACKER KIT Model 96755 SET UP AND OPERA TING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally . Due to continuing improvements, actual product may diffe r slightly from the product described herein. Distributed exclusively by Harbor Freight T ools ® .
Page 2 SKU 96755 For technical questions, please call 1-800-444-3353. SA VE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures.
Page 3 SKU 96755 For technical questions, please call 1-800-444-3353. GENERAL SAFETY RULES W ARNING! Read all instructions Failure to follow all instructions listed below may result in electric shock, re, and/or serious injury . SA VE THESE INSTRUCTIONS Keep your work area clean and well lit.
Page 4 SKU 96755 For technical questions, please call 1-800-444-3353. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one product may become hazard- ous when used on another product. When servicing a product, use only identical replacement parts.
Page 5 SKU 96755 For technical questions, please call 1-800-444-3353. SET UP INSTRUCTIONS Read the ENTIRE IMPORT ANT SAFETY INFORMA TION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Page 6 SKU 96755 For technical questions, please call 1-800-444-3353. Depth Adjustment Knob (1) Figure 3 T o adjust force that will be exerted on the fastener to drive it deeper into the work piece, use the Depth Adjustment Knob located at the top of the Staple Gun-see Figure 3.
Page 7 SKU 96755 For technical questions, please call 1-800-444-3353. MAINTENANCE AND SERVICING Cleaning and Removing the Staple Channel Push the Retaining Clip at the front of the Staple Gun forward to release the Staple Channel. Pull the two tabs (located midpoint on the bottom of the Staple Gun) toward the back of the Staple Gun.
Page 8 SKU 96755 For technical questions, please call 1-800-444-3353. PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS LIST AND ASSEMBL Y DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y .
An important point after buying a device Harbor Freight Tools 96755 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 96755 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 96755 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 96755 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 96755 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 96755, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 96755.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 96755. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 96755 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
