Instruction/ maintenance manual of the product 95834 Harbor Freight Tools
Go to page of 11
FUEL INJECTION CANISTER CLEANER 95834 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2007 by Harbor Freight T ools ® .
Page 2 SKU 95834 For technical questions, please call 1-800-444-3353. SPECIFICA TIONS Air Regulator T ype Dial T ype / Push Lock Minimum/Maximum Working Pressure 5 PSI / 100 PSI Air Regulator Dimensio.
Page 3 SKU 95834 For technical questions, please call 1-800-444-3353. Use safety equipment when using this tool. W ear ANSI-approved safety 4. goggles and a NIOSH-approved respirator . Do not force this tool. Use the correct tool for your application.
Page 4 SKU 95834 For technical questions, please call 1-800-444-3353. .
Page 5 SKU 95834 For technical questions, please call 1-800-444-3353. SETUP .
Page 6 SKU 95834 For technical questions, please call 1-800-444-3353. SHUT OFF V AL VE (1) CANISTER (6) AIR HOSE COUPLER (NOT INCLUDED) CYLINDER CAP (10) AIR REGULA TOR (7) ELBOW FITTING (8) FIGURE A CHAIN (12) PRESSURE GAUGE (5) COUPLER SOCKET (15) 3.
Page 7 SKU 95834 For technical questions, please call 1-800-444-3353. T urn off the air compressor . Disconnect the air hose from the Elbow Fitting (8). 16. Then turn (counterclockwise) the Air Regulator (7) to its full OPEN position to re- lease pressure in the Canister (6).
Page 8 SKU 95834 For technical questions, please call 1-800-444-3353. Connect the Canister Hose (16) to the provided Decarbonizing Fitting (not includ- 7. ed). Locate a manifold vacuum port on the vehicle’s engine (NOT a ported vacuum) 8. near the throttle body or carburetor .
Page 9 SKU 95834 For technical questions, please call 1-800-444-3353. INSPECTION, MAINTENANCE, AND CLEANING 1. W ARNING! Make sure the Fuel Ignition Cleaner is disconnected from an en - gine and all pressure has been released from the tool before performing any in- spection, maintenance, or cleaning procedures.
Page 10 SKU 95834 For technical questions, please call 1-800-444-3353. P ARTS LIST & ASSEMBL Y DIAGRAM Part Description Q’ty 1 Shut Off V alve 1 2 T ee Fitting 1 5 Pressure Gauge 1 6 Canister 1 .
Page 1 1 SKU 95834 For technical questions, please call 1-800-444-3353. LIMITED 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durabil.
An important point after buying a device Harbor Freight Tools 95834 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 95834 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 95834 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 95834 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 95834 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 95834, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 95834.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 95834. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 95834 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
