Instruction/ maintenance manual of the product 95346 Harbor Freight Tools
Go to page of 19
GASOLINE A UGER DRILL 1.5 HP Model 95346 ASSEMBL Y AND OPERA TION INSTR UCTIONS Due to continuing impro vements, actual product ma y diff er slightly from the product descr ibed herein. CAUTION! Y our W arranty Is V oided If: Y ou do not operate the Auger Drill with the proper 25:1 unleaded fuel/2-cycle oil mix in its fuel tank.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 2 REV 07b, 07e SPECIFICA TIONS Engine Specifications 1.5 HP / 52cc / Single Cylinder / 2-Stroke / Recoil Start Fuel Required 25:1 Unleaded Gasoline (89 octane or better) & 2 Cycle Oil Mixture Fuel T ank Capacity 0.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 3 GENERAL SAFETY RULES AND PRECAUTIONS W ARNING! READ AND UNDERST AND ALL INSTRUCTIONS Failure to f ollow all instructions listed belo w may result in electric shock, fire , and/or serious injury .
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 4 Do not use the Auger Drill if the Kill Switch does not turn it off. Any tool that cannot be controlled with its Kill Switch is dangerous and must be replaced. Store idle tools out of reach of children and other untrained persons.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 5 Never leave the Auger Drill unattended when it is running. T urn of f the Engine before leaving. Do not allow children and other unauthorized people to handle or play with the Auger Drill.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 6 When spills of fuel or oil occur , they must be cleaned up immediately . Dis- pose of uids and cleaning materials as per any local, state, or federal codes and regulations. Store oil rags in a covered metal container .
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 7 UNP ACKING When unpacking, check to make sure all the parts shown on the Parts Lists on pages 14, 16, and 18 are included. If any parts are missing or broken, please call Harbor Freight T ools at the number shown on the cover of this manual as soon as possible.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 8 PRE-ST ART INSTRUCTIONS Fill the Fuel T ank IMPORT ANT! Y our warranty is voided if you do not operate the Auger Drill with the proper 25:1 fuel mix in its Fuel T ank (89). Never run the Engine with an improper fuel mix, low or no fuel mix.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 9 OPERA TION Starting and Stopping W ARNING! Always wear safety equipment. When operating the Auger Drill, always wear ANSI-approved safety impact eye goggles, hearing protection, heavy duty work gloves, sturdy work boots, and head protection.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 10 W ARNING! The Auger (33a) should never turn at idle. If it is turning at idle, turn the Idle Screw of the Carburetor (shown right.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 1 1 Drilling a Hole Stand with a solid stance on stable gro und. Brac e you rsel f and main tain a proper grip with both hands on the Frame (1b) whenever the Engine is running. (See Figure E.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 12 INSPECTION, MAINTENANCE, AND CLEANING W ARNING! Always make sure the Spark Plug (51) is removed and the engine has cooled completely prior to performing any service, maintenance, or cleaning of the Auger Drill.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 13 TROUBLESHOOTING Problem Possible Cause Possible Solution Engine will not start. Low or no fuel in fuel tank or improper fuel/2-cycle oil mix. Not enough fuel getting to carburetor .
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 14 P ARTS LIST - ENGINE Part Description Qty . 1 Set Screw (M5 x 12) 1 2 Gasket 1 3 Reel 1 4 Starter Rope 1 5 Spiral Spring 1 6 Rewind Starter Assy .
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 15 ASSEMBL Y DIAGRAM - ENGINE.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 16 P ARTS LIST - GEARBOX UNIT REV 07b Part Description Qty . 1a Starting Flange 1 2a Oil Seal (20 x 52 x 7) 1 3a W asher 1 4a W ashe.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 17 P ARTS LIST & ASSEMBL Y DIAGRAM - FRAME Part Description Qty . 1b Frame (Complete) 1 2b Handle 1 3b T ie Strip 3 4b Handle 1 5b Kill Switch 1 Part Description Qty .
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 18 Emission Control System W arranty United States Emission Control Defects W arranty Statement The United States Environmental Prot.
SKU 95346 For technical questions, please call 1-800-444-3353 P AGE 19 5. Service and Maintenance Component parts which are not scheduled for replacement as required maintenance or are scheduled only for regular inspection to the effect of “repair or replace as necessary” are warranted for the warranty period.
An important point after buying a device Harbor Freight Tools 95346 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 95346 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 95346 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 95346 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 95346 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 95346, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 95346.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 95346. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 95346 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
