Instruction/ maintenance manual of the product 95149 Harbor Freight Tools
Go to page of 8
RADIO-CONTR OLLED F AST CHARGE AIRPLANE MODEL 95149 ASSEMBL Y AND OPERA TING INSTR UCTIONS Due to continuing improvements, actual product may differ slightly from product described herein. 3491 Mission Oaks Blvd. Camarillo , CA 93011 Visit our Web site at http://www .
SPECIFICA TIONS Number of Wheels: 2 F ront, 1 Rear Wheel Diameter : 3/4" F ront, 5/16" Rear Signal: 26.995 mHz Dual, F ront Mounted DC Motors Wingspan: 13-7/8" T ail Wingspan: 5-7/8" Propeller Size: 2-3/8" Diameter 2-Channel T ransmitter Overall Length: 11-1/2" Weight: 1-1/2 LBS.
12. Before fl ying: P erf or m a distance check to be cer tain that you can maintain r adio control at least 25’ from T r ansmitter to Air plane with the Antenna collapsed. 13. Do not trim the Airplane’ s Antenna. T rimming the Antenna would affect the control range .
ASSEMBL Y 1. Carefully push the T ail Landing Gear (6) into its slot, being careful not to prick a finger on the end of the gear wire. See Figure 1. Figure 1 Figure 2 2. Hold the Fuselage (4) with the bottom side up in one hand and carefully push the Main Landing Gear (5) into the slot provided.
Figure 3A Figure 3B 4. While holding the Fuselage (4) in one hand, gently slide the T ail Wing (7) into the slot on the Rudder (13) using an easy back and f or th motion. See Figure 4. Figure 4 5. Bef ore Flight T est, cover the Fuselage Battery Compar tment (12) with the Batter y Compar tment Cover (9).
TRANSMITTER/B A TTER Y CHARGER ASSEMBL Y 1. Attach Antenna (14) by threading it into the top of the T ransmitter/Batter y Charger (15). See Figure 5. 2. Note how the F emale Battery Connector (3B) connects to the T r ansmitter/Batter y Charger (15) in order to recharge.
CHARGING When the Red LED light flashes, it is time to recharge the batteries. T o char ge Rechargeable Batteries: T ur n the T ransmitter P ower Switch to OFF . Remov e the Batter y (8) through the bottom of the Fuselage (4). Plug the Female Batter y Connector (3B) into the por t on the back of the T ransmitter/Batter y Charger (15).
ASSEMBL Y DIA GRAM P ar t number 15, the T ransmitter/Battery Charger and par t number 16, the T r ansmitter Battery Compar tment Cover are not sho wn in the above Assemb ly Diagram. NO TE: Some par ts are listed for illustration purposes only , and are not av ailable individually as replacement par ts.
An important point after buying a device Harbor Freight Tools 95149 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 95149 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 95149 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 95149 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 95149 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 95149, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 95149.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 95149. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 95149 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
