Instruction/ maintenance manual of the product 94108 Harbor Freight Tools
Go to page of 10
1” DRIVE INDUSTRIAL AIR IMP ACT WRENCH ASSEMBL Y AND OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our W eb site at http://www .
Page 2 SKU 94108 For technical questions, please call 1-800-444-3353 Specications T orque 1,250 FT ./LBS. Working Pressure 100 PSI, 1 15 PSI = maximum air pressure Air Consumption 14 CFM Average Ai.
Page 3 SKU 94108 For technical questions, please call 1-800-444-3353 Wear a full face shield if you are producing metal lings or wood chips. W ear an ANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists.
Page 4 SKU 94108 For technical questions, please call 1-800-444-3353 Impact W rench Safety Precautions 19. Only use Impact Sockets with this tool. Standard sockets will not withstand the force applied by this tool, and may break, possible causing personal injury and/or property injury .
Page 5 SKU 94108 For technical questions, please call 1-800-444-3353 Assembly The only assembly required is to install Side Handle (8), per the following instruc- tions. Using Cap Screws (7), and the supplied Allen Wrench, mount the Side Handle (8) to the Front Casing (5).
Page 6 SKU 94108 For technical questions, please call 1-800-444-3353 OPERA TION NOTE: T urn of f your air compressor and disconnect the air pressure hose before changing sockets or making any adjustments to this tool. Severe injury or property damage may result otherwise.
Page 7 SKU 94108 For technical questions, please call 1-800-444-3353 Caution: Never increase pressure at the air compressor regulator to achieve more torque.
Page 8 SKU 94108 For technical questions, please call 1-800-444-3353 Parts List 1 8 Rotation / T orque Knob #205 #60205.
Page 9 SKU 94108 For technical questions, please call 1-800-444-3353 Assembly Drawing NOTE : Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.
Page 10 SKU 94108 For technical questions, please call 1-800-444-3353 Lubrication Gear oil should be added in part #4, use MoS2 lubricating grease. It should be added monthly . The amount is 0.033-0.044 lb. each time. Gear oil should be added in part #44, use Spindle Oil.
An important point after buying a device Harbor Freight Tools 94108 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 94108 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 94108 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 94108 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 94108 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 94108, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 94108.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 94108. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 94108 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
