Instruction/ maintenance manual of the product 93742 Harbor Freight Tools
Go to page of 8
6” Random Orbit 6” Random Orbit 6” Random Orbit 6” Random Orbit 6” Random Orbit Palm Sander Palm Sander Palm Sander Palm Sander Palm Sander ASSEMBL Y AND OPERA TING INSTR UCTIONS 3491 Mission Oaks Blvd ., Camar illo , CA 93011 Visit our W eb site at http://www .
SKU 93742 For technical questions, please call 1-800-444-3353. Page 2 Specifications Save This Man ual Y ou will need the manual for the saf ety war nings and precautions , assembly instructions, operating and maintenance procedures, par ts list and diag ram.
SKU 93742 For technical questions, please call 1-800-444-3353. Page 3 and nonskid f ootwear are recommended when wo rk ing. W ear restr ictive hair cov e r ing to contain long hair . 7. Use eye and ear protection . Alwa ys wear ANSI approv ed impact saf ety goggles.
SKU 93742 For technical questions, please call 1-800-444-3353. Page 4 18. Use pr oper siz e and type air pressure line and fittings . The recommended air line for this tool is 3/8” ID delivering no more than 90 PSI. 19. Maintenance . F or y our safety , ser vice and maintenance should be perfo rmed regular ly by a qualified technician.
SKU 93742 For technical questions, please call 1-800-444-3353. Page 5 Air Pressure Supply This tool is designed to oper ate with a maximum air pressure of 90 PSI. Y ou m u s t use an air regulator , set at 90 PSI or below . In use , this tool will use , on ave r age, 7 Cubic Feet per Minute of compressed air at 90 PSI.
SKU 93742 For technical questions, please call 1-800-444-3353. Page 6 Remo ving Bac king Pad (31) 1. Disconnect tool from air supply . Slide Wrench (36) under Skir t (30) as shown in photo at right. Engage Wrench with P ad Retainer (38). 2. Holding Wrench fir mly , rotate Backing P ad (31) countercloc kwise to remo ve .
SKU 93742 For technical questions, please call 1-800-444-3353. Page 7 Replacing Backing P ad (31) 1. Disconnect air pressure hose from tool 2. Place Wrench (36) onto P ad Retainer (38) and hold fir mly . 3. Place Backing P ad (31) on P ad Retainer (38) and turn clockwise to attach.
SKU 93742 For technical questions, please call 1-800-444-3353. Page 8 t r a Pn o i t p i r c s e D. Y T Qt r a Pn o i t p i r c s e D. Y T Qt r a Pn o i t p i r c s e D.
An important point after buying a device Harbor Freight Tools 93742 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 93742 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 93742 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 93742 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 93742 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 93742, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 93742.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 93742. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 93742 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
