Instruction/ maintenance manual of the product 93629 Harbor Freight Tools
Go to page of 9
MINI ORBIT AL SANDER Model 93629 ASSEMBL Y AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2006 by Harbor Freight T ools ® .
PRODUCT SPECIFICA TIONS SA VE THIS MANUAL Y ou will need this manual for the safety warnings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual.
8. Dress properly . Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid foot- wear are recommended when working. Wear restrictive hair covering to contain long hair .
SKU 93629 For technical questions, please call 1-800-444-3353 P AGE 4 17. Replacement parts and accessories. This product is to be repaired and servicedonlybyaqualiedtechnician.Whenthisproductisserviced,only identical replacement parts should be used.
23. W ARNING! The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur . It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator .
FIGURE C QUICK CONNECTOR (NOT INCLUDED) THROTTLE (2) P AD (44) SANDING DISC (46, 46A, 46B) SKU 93629 For technical questions, please call 1-800-444-3353 P AGE 6 4. Connect the other end of the air hose to the air compressor system. (See Figure A, page 4.
SKU 93629 For technical questions, please call 1-800-444-3353 P AGE 7 INSPECTION, MAINTENANCE, AND CLEANING 1. W ARNING! Prior to performing any inspection, maintenance, or cleaning of the Air Sander , make sure to disconnect the air hose from the tool.
SKU 93629 For technical questions, please call 1-800-444-3353 P AGE 8.
LIMITED 1 YEAR W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product i.
An important point after buying a device Harbor Freight Tools 93629 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 93629 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 93629 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 93629 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 93629 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 93629, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 93629.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 93629. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 93629 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
