Instruction/ maintenance manual of the product 93364 Harbor Freight Tools
Go to page of 12
12” BEAD R OLLER KIT Model 93364 ASSEMBL Y AND OPERA TING INSTR UCTIONS 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at: http://www.
PR ODUCT SPECIFICA TIONS SA VE THIS MANU AL Y ou will need this manual f or the saf ety war nings and precautions , assembly , operating, inspection, maintenance and cleaning procedures, par ts list and assembly diagram. K eep your in v oice with this manual.
SKU 93364 For technical questions, please call 1-800-444-3353 P AG E 3 2. Keep bystanders, children, and visitors away while operating the Bead Roller Kit. Distractions can cause you to lose control. PERSONAL SAFETY 3. Stay alert. W atch what y ou are doing, and use common sense when operating a power tool.
SKU 93364 For technical questions, please call 1-800-444-3353 P AGE 4 SER VICE 12. Bead Roller Kit service must be performed only by qualified service technician. Service or maintenance performed by unqualified personnel could result in a risk of injur y .
SKU 93364 For technical questions, please call 1-800-444-3353 P AGE 5 INST ALLA TION AND ASSEMBL Y INSTRUCTIONS 1. CA UTION! The Bead Roller is heavy . Alwa ys use two people when lifting or moving the tool. 2 . Use a standard shop vise (not included) to securely hold the Bead Roller .
SKU 93364 For technical questions, please call 1-800-444-3353 P AG E 6 edges of the Cutting Plates should be touching (or almost touching). If they are not, perform the following steps: 3 . Use the 4mm Hex K ey Wrench (27) to loosen the two He x Bolts (16) that secure the Gear (5) and Collar (6) to the Active Roller (3).
SKU 93364 For technical questions, please call 1-800-444-3353 P AG E 7 2 . Use the 5mm (26) Hex K ey Wrench to remove the eight He x Bolts (18) securing the Cutting Plates (9) to the Cutting Dies (10-1, 10-2). (See Figure C.) 3 . Remove the Cutting Plates (9).
END BOL TS (14) A CTIVE ROLLER (3) POSITIVE ROLLER (4) THICKNESS ADJUSTING BOL T (15) W ASHERS (13) DIES (19-1 THRU 24-2) ROLL BLOCK (2) FIGURE D Adjusting Roller T ension: 1 . Adjust the Thickness Adjusting Bolt (15) only finger tight. (See Figure E.
OPERA TING INSTR UCTIONS 1. CA UTION! Do not exceed the maxim um thic kness capacity (18 gauge) of the Bead Roller . 2 . Alwa ys use two people to operate the Bead Roller . One person should guide the metal along the Roller while a second person cranks the Handle (12) of the tool.
SKU 93364 For technical questions, please call 1-800-444-3353 P AG E 1 0 4. C A U TI ON ! All maintenance, service, and repairs not discussed in this manual should only be perf or med by a qualified ser vice technician. TROUBLESHOOTING 3. T o clean, use a clean cloth and mild detergent or non-flammable solvent.
SKU 93364 For technical questions, please call 1-800-444-3353 P AGE 1 1 P ARTS LIST Part # Descripti on Qty. Part # Descriptio n Qty. 1 Base 1 17 Bushing 1 2 Roll Block 4 18 Hex Bolt (M6x10) 8 3 Activ.
ASSEMBL Y DIA GRAM SKU 93364 For technical questions, please call 1-800-444-3353 P AG E 12 NO TE: Some par ts are listed and shown f or illustration pur poses only , and are not av ailable individually as replacement par ts.
An important point after buying a device Harbor Freight Tools 93364 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 93364 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 93364 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 93364 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 93364 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 93364, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 93364.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 93364. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 93364 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
