Instruction/ maintenance manual of the product 92801 Harbor Freight Tools
Go to page of 9
R O T A R Y LASER LEVEL KIT Model 92801 OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd., Camar illo , CA 93011 Visit our W eb site at: http://www .harborfreight.
Page 2 SKU 92801 For technical questions, please call 1-800-444-3353. PRODUCT SPECIFICA TIONS GENERAL SAFETY RULES W ARNING! READ AND UNDERST AND ALL INSTR UCTIONS Failure to follow all instructions listed below may result in serious injury . SA VE THESE INSTRUCTIONS W ORK AREA 1.
Page 3 SKU 92801 For technical questions, please call 1-800-444-3353. 3. Keep bystanders, children, and visitors away while operating this tool. Distractions can cause you to lose control. Protect others in the work area from the laser beam. Provide barriers or shields as needed.
Page 4 SKU 92801 For technical questions, please call 1-800-444-3353. 10. Use safety equipment. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used f or appropriate conditions. The inc luded laser en- hancement glasses are NO T intended to pr otect y our e y es in an y wa y .
Page 5 SKU 92801 For technical questions, please call 1-800-444-3353. SPECIFIC SAFETY RULES 1. W ARNING! Laser light can har m the e ye. Do not look directly into this Laser Level, or the reflection of the light. Do not allow any other person or animal to be e xposed to the direct or reflected laser beam.
Page 6 SKU 92801 For technical questions, please call 1-800-444-3353. accessories, performing inspection, maintenance, cleaning procedures, or storing the tool. 10. Battery precautions: Never burn Batteries, as they can explode in a fire. Con- tact local solid waste authorities for instructions on correct disposal or recycling of the Batteries.
Page 7 SKU 92801 For technical questions, please call 1-800-444-3353. 2. If using the Laser Le vel with the T r ipod (3), thread the T ripod Stud located on the T ripod Neck into the bottom of the Laser Lev el. The T r ipod s w iv els 360 deg r ee . P osition the T r ipod on a flat, le vel, dry ground surf ace.
Page 8 SKU 92801 For technical questions, please call 1-800-444-3353. OPERA TING INSTRUCTIONS 1. When the Laser Level is properly positioned, turn on the Laser by rotating the Rotation Speed Control (10), cloc kwise. Then, rechec k the Le vel Vials (4, 9) to make sure the Laser Level has not been bumped or moved.
Page 9 SKU 92801 For technical questions, please call 1-800-444-3353. NO TE : NO REPLA CEMENT P AR TS ARE A V AILABLE FOR THIS PR ODUCT . INSPECTION, MAINTENANCE, AND CLEANING 1.
An important point after buying a device Harbor Freight Tools 92801 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 92801 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 92801 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 92801 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 92801 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 92801, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 92801.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 92801. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 92801 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
