Instruction/ maintenance manual of the product 69474 Harbor Freight Tools
Go to page of 20
Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2012 by Harbor Freight T ools ® . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight T ools.
Page 2 For technical questions, please call 1-800-444-3353. Item 69474 T able of Contents Safety ......................................................... 2 Specifications ............................................ 10 Setup .........................
Page 3 For technical questions, please call 1-800-444-3353. Item 69474 Electrical safety 1. Power tool plugs must match the outlet. Never modify the plug in any way . Do not use any adapter plugs with grounded power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
Page 4 For technical questions, please call 1-800-444-3353. Item 69474 Power tool use and care 1. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
Page 5 For technical questions, please call 1-800-444-3353. Item 69474 Safety W arnings Common for Grinding, Sanding, Wire Brushing, Polishing, or Abrasive Cutting-Off Operations 1.
Page 6 For technical questions, please call 1-800-444-3353. Item 69474 16. Do not use accessories that require liquid coolants. Using water or other liquid coolants may result in electrocution or shock. 17. Maintain labels and nameplates on the tool. These carry important safety information.
Page 7 For technical questions, please call 1-800-444-3353. Item 69474 Safety W arnings Specific for Sanding Operations Do not use excessively oversized sanding disc paper .
Page 8 For technical questions, please call 1-800-444-3353. Item 69474 Grounding TO PREVENT ELECTRIC SHOCK AND DEA TH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded.
Page 9 For technical questions, please call 1-800-444-3353. Item 69474 Extension Cords 1. Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord. 2. As the distance from the supply outlet increases, you must use a heavier gauge extension cord.
Page 10 For technical questions, please call 1-800-444-3353. Item 69474 Specifications Electrical Rating 120V~ / 60Hz / 10A Motor No Load Speed 600-3500 RPM Max.
Page 1 1 For technical questions, please call 1-800-444-3353. Item 69474 Option 1: Using with the D-Handle Alone Attach the D-Handle alone to the sides of the Front Cover , using the Hex Key and two Hex Head Bolts. Note: Slide the Hex Key through the hole in the Handle to access the Bolt on the long side of the Handle.
Page 12 For technical questions, please call 1-800-444-3353. Item 69474 Functions Side Handle Handle Spindle Lock Safety Lock D-Handle T rigger Speed Dial Hex Key Backing Pad Figure F SAFETY OPERA TIO.
Page 13 For technical questions, please call 1-800-444-3353. Item 69474 Operating Instructions Read the ENTIRE IMPORT ANT SAFETY INFORMA TION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Page 14 For technical questions, please call 1-800-444-3353. Item 69474 Polishing 1. Make sure the surface to polish has been thoroughly washed, and is free of dust, dirt, oil, grease, etc. 2. Place a clean Foam Pad (sold separately) securely onto the Backing Pad.
Page 15 For technical questions, please call 1-800-444-3353. Item 69474 Sanding 1. Make sure that the surface to be sanded is wiped clean of all dirt and debris, especially that of previous courser sanding sessions, which will scratch the surface of a finer grit sanding session.
Page 16 For technical questions, please call 1-800-444-3353. Item 69474 Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician.
Page 17 For technical questions, please call 1-800-444-3353. Item 69474 T roubleshooting Problem Possible Causes Likely Solutions T ool will not start. 1. Cord not connected. 2. No power at outlet. 3. Internal damage or wear . (Carbon brushes or switch, for example.
Page 18 For technical questions, please call 1-800-444-3353. Item 69474 Record Product’ s Serial Number Here: Note: If product has no serial number , record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts.
Page 19 For technical questions, please call 1-800-444-3353. Item 69474 Assembly Diagram 19 20 32 41 46 35 49 48 47 45 44 43 42 40 39 38 37 36 34 33 31 30 29 28 27 26 25 24 23 22 21 18 17 16 15 14 13 .
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 9301 1 • (800) 444-3353 Limited 90 Day W arranty Harbor Freight T ools Co. makes every effort to assure that its products meet high quality .
An important point after buying a device Harbor Freight Tools 69474 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 69474 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 69474 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 69474 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 69474 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 69474, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 69474.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 69474. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 69474 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
