Instruction/ maintenance manual of the product 69054 Harbor Freight Tools
Go to page of 12
Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2012 by Harbor Freight T ools ® . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight T ools.
Page 2 For technical questions, please call 1-800-444-3353. Item 69054 T able of Contents Safety ......................................................... 2 Specifications ............................................. 3 Setup .........................
Page 3 For technical questions, please call 1-800-444-3353. Item 69054 Specifications T op Shelf Weight Capacity 250 lb. Drawer Weight Capacity 25 lb. (per drawer) Bottom Shelf Capacity 200 lb.
Page 4 For technical questions, please call 1-800-444-3353. Item 69054 3. Once both Legs have been fastened to the Cross Brace, slide the Shelf (2) above against the Legs so that the far edge fits onto the groove on the Cross Brace. See Figure C, right.
Page 5 For technical questions, please call 1-800-444-3353. Item 69054 6. Set the Sliding Partition (14) into place by inserting the tabs at the end of the Partition into the holes at the center of the T able T op’ s underside. See Figure F , right.
Page 6 For technical questions, please call 1-800-444-3353. Item 69054 9. Use the Hex Wrench and Screws (6) to fasten the tops of the Legs to the T able T op underside. See Figure I, right. 10. Use the Hex Wrench and Screws (13) to fasten the sides of the Legs to the T able T op underside.
Page 7 For technical questions, please call 1-800-444-3353. Item 69054 12. Once the ends of the Lower Support have been fastened to the Legs, use the Screws (6) to fasten the middle of the Lower Support to the top of the Sliding Partition. See Figure L, right.
Page 8 For technical questions, please call 1-800-444-3353. Item 69054 17. Use the Drawer Screws (22) to fasten the Drawer Handles (21) to the Drawer Front Panels (16). See Figure O, right. Note: Each Drawer piece should have a sticker designating what it is (P1-P5).
Page 9 For technical questions, please call 1-800-444-3353. Item 69054 20. Fasten Drawer Bottom to Drawer Pack Panel. Once Drawers are fully assembled, verify that the inside tracks along the Sliding Partition are pushed forward. See Figure R, right. 21.
Page 10 For technical questions, please call 1-800-444-3353. Item 69054 Part Description Qty 1 T able T op 1 2 Shelf 1 3 Cross Brace 2 4 Leg 2 5 Vise 1 6 Screw (50mm) 6 7 Bolt (60mm) 8 8 Connecting Nu.
Page 1 1 For technical questions, please call 1-800-444-3353. Item 69054 Assembly Diagram T able T op (1) Shelf (2) Cross Brace (3) Leg (4) Vise (5) Screw (50mm) (6) Bolt (60mm) (7) Connecting Nut (8).
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 9301 1 • (800) 444-3353 Limited 90 Day W arranty Harbor Freight T ools Co. makes every effort to assure that its products meet high quality .
An important point after buying a device Harbor Freight Tools 69054 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 69054 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 69054 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 69054 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 69054 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 69054, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 69054.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 69054. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 69054 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
