Instruction/ maintenance manual of the product 68147 Harbor Freight Tools
Go to page of 15
ELECTRIC HAMMER Model 68147 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2010 by Harbor Freight T ools ® .
Page 2 For technical questions, please call 1‑800‑444‑3353. SKU 68147 SA VE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures.
Page 3 For technical questions, please call 1‑800‑444‑3353. SKU 68147 entering a power tool will increase the risk of electric shock. c. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Page 4 For technical questions, please call 1‑800‑444‑3353. SKU 68147 e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’ s operation. If damaged, have the power tool repaired before use.
Page 5 For technical questions, please call 1‑800‑444‑3353. SKU 68147 • Properly maintain and inspect to avoid electrical shock. • Any power cord must be properly grounded. Ground Fault Circuit Interrupter (GFCI) should also be implemented – it prevents sustained electrical shock.
Page 6 For technical questions, please call 1‑800‑444‑3353. SKU 68147 GROUNDING TO PREVENT ELECTRIC SHOCK AND DEA TH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualied electrician if you are in doubt as to whether the outlet is properly grounded.
Page 7 For technical questions, please call 1‑800‑444‑3353. SKU 68147 8. Protect the extension cords from sharp objects, excessive heat, and damp or wet areas. RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS* (120/240 VOL T) NAMEPLA TE AMPERES (at full load) EXTENSION CORD LENGTH 25’ 50’ 75’ 100’ 150’ 0 – 2.
Page 8 For technical questions, please call 1‑800‑444‑3353. SKU 68147 SPECIFICA TIONS Electrical Input 120 V~ / 60 Hz / 15 A Blows Per Minute 950 BPM Chisel 1 Bull Point (included) Weight 71 lb.
Page 9 For technical questions, please call 1‑800‑444‑3353. SKU 68147 OPERA TING INSTRUCTIONS Read the ENTIRE IMPORT ANT SAFETY INFORMA TION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Page 10 For technical questions, please call 1‑800‑444‑3353. SKU 68147 against the work surface. Hold the Electric Hammer with just enough pressure so that the tool’s own weight supplies the needed force.
Page 1 1 For technical questions, please call 1‑800‑444‑3353. SKU 68147 Chisels with approved replacement Chisels from Harbor Freight T ools. 8. Check that all mounting screws are tightened. Retighten any loose screws. 9. Store in temperatures no lower than 50-60° F .
Page 12 For technical questions, please call 1‑800‑444‑3353. SKU 68147 T roubleshooting Problem Possible Causes Likely Solutions T ool will not start. 1. Cord not connected. 2. No power at outlet. 3. T ool’s thermal reset breaker tripped (if equipped).
Page 13 For technical questions, please call 1‑800‑444‑3353. SKU 68147 LIMITED 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every ef fort to assure that its products meet high quality and d.
Page 14 For technical questions, please call 1‑800‑444‑3353. SKU 68147 P ARTS LIST Part Description Qty 1 Housing 1 2 End Cover 1 3 Hex Socket Bolt (M10X35) 4 4 Flat W asher (Ø1 0) 14 5 Brush C.
Page 15 For technical questions, please call 1‑800‑444‑3353. SKU 68147 ASSEMBL Y DIAGRAM.
An important point after buying a device Harbor Freight Tools 68147 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 68147 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 68147 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 68147 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 68147 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 68147, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 68147.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 68147. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 68147 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
