Instruction/ maintenance manual of the product 6510 Harbor Freight Tools
Go to page of 16
10” BENCH GRINDER 6510 SET UP AND OPERA TING INSTRUCTIONS Distributed exclusively by Harbor Freight T ools ® . 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our website at: http://www .harborfreight.com Read this material before using this product.
Page 2 For technical questions, please call 1-800-444-3353. SKU 6510 CONTENTS IMPORT ANT SAFETY INFORMA TION ............................ 3 GENERAL T OOL SAFETY W ARNINGS ...................................... 3 GROUNDING INSTRUCTIONS ..... 5 1 10-120 V~ GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS .
Page 3 For technical questions, please call 1-800-444-3353. SKU 6510 SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures.
Page 4 For technical questions, please call 1-800-444-3353. SKU 6510 DON’T FORCE TOOL. It will do the 7. job better and safer at the rate for which it was designed. USE RIGHT TOOL. Don’t force tool 8. or attachment to do a job for which it was not designed.
Page 5 For technical questions, please call 1-800-444-3353. SKU 6510 or other part that is damaged should be properly repaired or replaced. DIRECTION OF FEED. Feed work 20. into a blade or cutter against the di- rection of rotation of the wheel only .
Page 6 For technical questions, please call 1-800-444-3353. SKU 6510 1 10-120 V~ Double Insulated T ools: T ools with T wo Prong Plugs Outlets for 2-Prong Plug T o reduce the risk of electric shock, 1. double insulated equipment has a po- larized plug (one blade is wider than the other).
Page 7 For technical questions, please call 1-800-444-3353. SKU 6510 Avoid unintentional starting. Prepare 17. to begin work before turning on the tool. People with pacemakers should 18. consult their physician(s) before use. Electromagnetic elds in close prox - imity to heart pacemaker could cause pacemaker interference or pacemak- er failure.
Page 8 For technical questions, please call 1-800-444-3353. SKU 6510 Use tools with the lowest vibration 4. when there is a choice between dif- ferent processes. Include vibration-free periods each 5. day of work. Grip tool as lightly as possible (while 6.
Page 9 For technical questions, please call 1-800-444-3353. SKU 6510 SPECIFICA TIONS Electrical Input 120 V~ / 60 Hz / 8.4 A 1 HP (rated) / 2 HP (peak) No Load Speed 1750 RPM Accessory Dia. 10” Max. Arbor Size 20mm UNP ACKING When unpacking, make sure that the item is intact and undamaged.
Page 10 For technical questions, please call 1-800-444-3353. SKU 6510 ASSEMBL Y The 10” Bench Grinder requires minor assembly . The assembly instructions below are written for the left side but the right side is identical. Refer to the Parts List, at the back of this manual, for the individual part numbers.
Page 1 1 For technical questions, please call 1-800-444-3353. SKU 6510 FIGURE 4 – Attaching the Eye Shield to Wheel Cover Shield Su ppo rt s (4) Nut (13) W ashers (14) Bolt (12) Eye Shield (3) 2. Remove the BOL T (12) and NUT (13) from the upper grinder housing as shown in Figure 4.
Page 12 For technical questions, please call 1-800-444-3353. SKU 6510 Installing Grinding Wheel Note: Do not use aluminum oxide grind- ing wheels when grinding nonferrous metals such as aluminum and brass. Use silicon carbide grinding wheels for all nonferrous metals Make sure the inside WHEEL 1.
Page 13 For technical questions, please call 1-800-444-3353. SKU 6510 OPERA TION Caution: The grinding wheels must al- ways be checked for cracks of imper- fections. This is done with the “ring test”. T ap the wheel gently near the outer rim with the handle of a screw- driver; you should hear a clear bell- like ringing.
Page 14 For technical questions, please call 1-800-444-3353. SKU 6510 Part Description 1 Screw 2 Left Wheel Cover 3 Nut 4 Clamp W asher 5 Left Wheel 6 Left Wheel Guard 7 Nut 8 Left T ool Rest 9 Screw .
Page 15 For technical questions, please call 1-800-444-3353. SKU 6510 ASSEMBL Y DIAGRAM REV 99h 33 1 2 3 4 5 4 6 19 7 9 19 42 46 8 10 1 1 12 13 14 15 16 18 17 7 45 15 21 7 19 11 37 36 40 19 35 38 34 4.
Page 16 For technical questions, please call 1-800-444-3353. SKU 6510 LIMITED 1 YEAR / 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and .
An important point after buying a device Harbor Freight Tools 6510 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 6510 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 6510 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 6510 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 6510 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 6510, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 6510.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 6510. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 6510 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
